Genuine Toyota Universal Joint Spider Kit 04371-27011 0437127011 For Hiace IV/V & Town Ace 4WD — OEM Front Propeller Shaft Cross Joint 28x75mm
Key Attributes
Product Summary
Genuine Toyota Universal Joint Spider Kit 04371-27011Product OverviewThe Universal Joint Spider Kit 04371-27011 is a genuine Toyota OEM replacement part designed specifically for Toyota Hiace and Town Ace 4WD vans. This critical component transmits torque from the transmission to the front drive ...
Product Details
Genuine Toyota universal joint kit
,OEM front propeller shaft joint
,Hiace Town Ace 4WD cross joint
The Universal Joint Spider Kit 04371-27011 is a genuine Toyota OEM replacement part designed specifically for Toyota Hiace and Town Ace 4WD vans. This critical component transmits torque from the transmission to the front drive axle while accommodating angular misalignment during suspension movement and steering.
- Clunking Noise: Loud clunking during acceleration or deceleration
- Squeaking at Low Speed: Indicates needle bearings have lost lubrication
- Vibration at Speed: Steering-speed vibration through chassis or steering wheel
- Driveline Shudder: Noticeable shudder during take-off from stop
- Metal Dust or Rust: Visible metal dust or rust stains near bearing caps
| Brand | Model | Chassis/Series | Years |
|---|---|---|---|
| Toyota | Hiace IV Bus/Van | H1_, H2_ (LXH18, LXH28) | 1995-2001 |
| Toyota | Hiace IV Van | H1_, H2_ (KLH18, KLH28) | 2001-2006 |
| Toyota | Hiace S.B.V | KLH1#, KLH2#, LXH1#, LXH2# | 1995-2011 |
| Toyota | Hiace/Regius Ace | KDH205, KDH206, KDH225, KDH227 | 2004-2013 |
| Toyota | Hiace V Bus/Van | TRH2__, KDH2__, LH2__, GDH2__ | 2004-2019 |
| Toyota | Town Ace | CM7#, KM7#, CM70, CM75, CM80, CM85 | 2000-2002 |
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify 28mm cross diameter and 75mm length match OE specifications |
| Material Composition | High-strength alloy steel analysis for trunnion hardness and core strength |
| Hardness Testing | Rockwell hardness testing to verify trunnion surface meets OEM specifications |
| Rotation Test | 100% rotation testing for smooth, noiseless bearing operation |
| Seal Integrity | Dust seal inspection for contamination resistance and grease retention |
| Final Assembly | 100% visual and dimensional inspection before packaging |
- Verify part number matches your original universal joint
- Mark propeller shaft and yokes before removal for correct phasing
- Inspect propeller shaft yokes for wear or damage
- Clean yoke bores thoroughly before installation
- Ensure vehicle is securely supported on jack stands
- Install new universal joint with NEW snap rings
- Ensure joint moves freely without binding
- Reinstall propeller shaft with correct alignment marks
- Torque all fasteners to manufacturer's specifications
- Lubricate through grease nipple with high-quality chassis grease
- Inspection: Every 50,000 km / 12 months
- Lubrication: Regular greasing through grease nipple
- Replacement: Immediately if failure symptoms appear
RELATED PRODUCTS
Gear Case Gasket 8-97331631-2 8973316312 For ISUZU D-MAX TFR TFS MU-X UCS UCR Rodeo Colorado 4JK1 4JJ1 — OEM Verified 1.45mm Fiber-Elastomer Composite, 2-Notch
OEM-verified 1.45mm fiber-elastomer gear case gasket with 2 notches for ISUZU 4JK1/4JJ1 engines. Hot-oil resistant composite ensures durable sealing across D-MAX, MU-X, Rodeo, Colorado, and Hitachi/JCB equipment. Precision-formed to OEM pattern; bulk export and custom kit options available.
Steering Knuckle Assembly 43211-KK010 For TOYOTA Hilux Revo GUN125 GUN126 GUN135 Fortuner AN150 AN160 2015-2025 — OEM Genuine Right Front RH, 96mm Wheel Bearing Bore
Genuine TOYOTA OEM 43211-KK010 RH steering knuckle for Hilux Revo & Fortuner 2015-2025. Cast steel, 96mm bearing bore, direct-fit. Verify KK010 vs KK030 by VIN. Pairs with 43212-KK010 LH. ISO quality control, export packing available.
Rear Right Lower Brake Wheel Cylinder 47560-36210 4756036210 For TOYOTA Coaster HZB50 RZB40 RZB50 Dyna 200 Toyoace 14B 15B 1HZ — OEM Verified Direct Fit, 28.5mm Bore, Cast Iron, Rear RH Lower
OEM-verified 47560-36210 rear right lower brake wheel cylinder for TOYOTA Coaster, Dyna 200, Toyoace. 28.5mm bore, cast iron, M10×1.0 thread, 100% pressure tested. Direct-fit R.RH.A position, cross-referenced to ADVICS, Blue Print, TRW. Bulk export ready.
Rear Left Lower Brake Wheel Cylinder 47580-36210 4758036210 For TOYOTA Coaster HZB50 RZB40 RZB50 BB42 Dyna 200 Toyoace 3B 14B 15B — OEM Verified Direct Fit, 1-1/8" Bore, Grey Cast Iron
OEM-verified 47580-36210 rear left lower brake wheel cylinder for TOYOTA Coaster, Dyna 200, Toyoace. 1-1/8" bore, grey cast iron, 100% pressure tested. Direct fit, R.LH.A position, DOT 3/4 compatible. Bulk export available.
