Propeller Shaft Cushion MC830615 For Mitsubishi Canter FE444 FE635 Center Bearing Support
| Part Name: | Propeller Shaft Cushion / Center Bearing Cushion / Driveshaft Center Support | Part No: | MC-830615, COB0615, MC563204, FB563024, MC830702 |
| Vehicle Application: | Mitsubishi Canter FE444, FE635, FE659 (FE Series) | Engine Application: | Mitsubishi 4D32, 4D33, 4D34, 4D35, 4D36 Diesel Engines |
| Bearing Type: | 6207 (Deep Groove Ball Bearing) | Bearing Inner Diameter: | 35 Mm |
| Material: | High-Quality Natural Rubber / 25% Synthetic Rubber + Steel Backing | Bearing Steel: | GCR15 High-Carbon Chrome Steel / High-Carbon Steel |
| Surface Treatment: | Precision Heat Treatment And Polishing | Mounting Type: | Bolt-On To Frame Crossmember |
| Net Weight: | Approx. 0.8–1.2 Kg Per Piece | Fitment: | OEM Standard, Direct Replacement |
| Condition: | Brand New | H/S Code: | 870899000 |
| High Light: | Mitsubishi Canter propeller shaft cushion,MC830615 center bearing support,ISUZU truck center bearing |
||
Function: Propeller shaft cushion (center bearing support) isolates driveline vibration and supports the driveshaft center bearing, ensuring smooth power transfer in Mitsubishi Canter trucks.
The Propeller Shaft Cushion (OEM Number: MC830615) is a premium-quality, direct replacement driveline component designed specifically for Mitsubishi Canter FE444, FE635, and FE659 series trucks. This rubber cushion - also known as a center bearing support cushion, driveshaft center support, or propshaft mounting - is a critical part of the two-piece propeller shaft assembly. It holds the center bearing in place and isolates the driveline from vibration and road shock, ensuring smooth power transfer from the transmission to the rear axle.
| Part Number | MC-830615, COB0615, MC563204, FB563024, MC830702 |
|---|---|
| Product Name | Propeller Shaft Cushion / Center Bearing Cushion / Driveshaft Center Support |
| Car Model | Mitsubishi Canter FE444, FE635, FE659 (FE series) |
| Engine Model | Mitsubishi 4D32, 4D33, 4D34, 4D35, 4D36 Diesel Engines |
| Condition | 100% Brand New |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing Or Make It As Requested |
| Warranty | 6 Months |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
- OE Quality: Manufactured to strict Mitsubishi dimensional and material specifications for perfect fit and function.
- High-Quality Rubber Compound: Natural/synthetic rubber blend withstands -40°C to +140°C for reliable performance in all climates.
- GCR15 Bearing Steel: Precision heat-treated and polished bearing for smooth, durable operation.
- Superior Vibration Isolation: Effectively dampens driveline vibration and road shock for a smoother ride.
- Restores Driveline Stability: Eliminates excessive driveshaft movement, clunking noises, and vibration caused by worn cushions.
- Direct Replacement: Matches OE mounting dimensions, bolt pattern, and bearing position.
- Complete Assembly: Includes rubber cushion with integrated center bearing (6207, 35mm ID).
- Long Service Life: Engineered for commercial truck duty cycles with resistance to oil, ozone, and weathering.
- Essential for Driveline Health: Protects universal joints, transmission output bearing, and differential pinion from excessive vibration.
This propeller shaft cushion is specifically designed for Mitsubishi light-duty commercial trucks. Common applications include:
- Mitsubishi Canter FE444 - 1990s-2000s models
- Mitsubishi Canter FE635 - FE series
- Mitsubishi Canter FE659 E/F - FE series
- Mitsubishi Canter FE449, FE639 - select models
- Mitsubishi Fuso Canter - FE series with two-piece driveshaft
Engine Specifications (typical for these models):
- 4D32 (3.6L), 4D33 (4.2L), 4D34 (3.9L), 4D35 (4.6L), 4D36 (3.6L) diesel engines
- Ensure vehicle is safely raised - Use appropriate jack stands or a lift to access the driveshaft.
- Mark driveshaft orientation - Before removal, mark the driveshaft and yoke positions to maintain balance during reassembly.
- Remove the driveshaft - Unbolt the universal joint straps or flange bolts at the transmission and differential ends; support the driveshaft.
- Remove the old cushion - Unbolt the center bearing support from the frame crossmember; separate the cushion from the bearing if necessary.
- Inspect the center bearing - Check for roughness, play, or noise; replace the bearing if worn.
- Inspect the driveshaft - Check universal joints and slip yoke for wear or damage.
- Install the new cushion - Position the new cushion and bearing assembly on the frame crossmember; align bolt holes.
- Torque mounting bolts - Tighten to manufacturer torque specifications.
- Reinstall the driveshaft - Align the match marks made during removal; reconnect universal joints and flanges.
- Torque driveshaft bolts - Tighten all fasteners to specification.
- Check for clearance - Ensure the cushion and driveshaft do not contact the frame or underbody.
- Road test - Test drive to verify smooth operation and no vibration or noise.
- Material Verification: Confirms rubber compound and steel backing meet Mitsubishi durability and temperature specifications.
- Bearing Performance Test: Bearing smoothness, noise, and rotational torque verified to OE specifications.
- Dimensional Inspection: Bearing bore (35mm), mounting bolt pattern, and overall dimensions verified for exact fit.
- Rubber-to-Steel Adhesion Test: Bond strength between rubber and steel backing verified for durability.
- Heat Resistance Testing: Rubber compound tested for performance across -40°C to +140°C range.
- Visual Inspection: 100% checked for rubber cracks, bearing defects, or assembly errors.
- Packaged Safely: Protected and packaged to prevent damage during transit.
Neutral export packing or customized packaging available. Carton or wooden case for safe transportation. Fast delivery for stock items. Shipping by Express Air or Sea.
For pricing, availability, or bulk purchase of the Propeller Shaft Cushion MC830615 For Mitsubishi Canter FE444 FE635 Center Bearing Support, please contact our sales team for a competitive quote and expert technical support.
Oil Power Steering Pump Assembly for ISUZU NPR 4HF1 8971365740 8971151350 8-97136574-0 8-97115135-0
Oil Power Steering Pump Assembly for ISUZU NPR 4HF1 8971365740 8971151350 8-97136574-0 8-97115135-0 Part Number: 8971365740 8971151350 8-97136574-0 8-97115135-0 Product Name: Oil Power Steering Pump Car Model: ISUZU NPR Engine Model: ISUZU 4HF1 Condition: 100% Brand New Size: Standard Weight: ...
Clutch Disc for ISUZU NPR 4BD1 8-97083723-0 8970837230
Clutch Disc for ISUZU NPR 4BD1 8-97083723-0 8970837230 Part Number: 8-97083723-0 8970837230 Product Name: Clutch Disc Car Model: ISUZU NPR Engine Model: ISUZU 4BD1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia,Africa, South America, ...
Rear Final Drive Assembly for ISUZU NKR55 8943389020 8-94338902-0
Rear Final Drive Assembly for ISUZU NKR55 8943389020 8-94338902-0 Part Number: 8943389020 8-94338902-0 Product Name: Rear Final Drive Assembly Car Model: ISUZU NKR55 Engine Model: ISUZU NKR55 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ...
Turbocharger Assembly for ISUZU XE 6HK1 1-14400390-0 1144003900
Turbocharger Assembly for ISUZU XE 6HK1 1-14400390-0 1144003900 Part Number: 1-14400390-0 1144003900 Product Name: Turbocharger Assembly Car Model: ISUZU XE Engine Model: ISUZU 6HK1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia,Africa...
