Parking Brake Cable 3850mm Length OEM Cross-Reference Verified for ISUZU NPR NQR with 12 Months Warranty
Key Attributes
Product Summary
OEM parking brake cable 8-97350534-0 for ISUZU NPR/NQR trucks with 3850mm length. Direct fit for 4HG1/4HF1 diesel engines, ISO/TS16949 certified, 12-month warranty. Ensures reliable parking brake function with high-strength construction.
Product Details
3850mm Parking Brake Cable
,OEM Cross-Reference Parking Brake Cable
,12 Months Warranty Handbrake Cable
| Part Number: | 8-97350534-0 8973505340 |
| Product Name: | Parking Brake Cable |
| Car Model: | NPR NQR |
| Engine Model: | 4HG1 4HF1 |
| Condition: | 100% Brand New |
| Cable Length: | 3850mm (385CM) |
| Net Weight: | 1.6 KG |
| HS Code: | 870830000 |
| Warranty: | 12 months |
- OEM Cross-Reference Verified: Replaces ISUZU OEM numbers 8-97350534-0 / 8973505340
- Fitment Verified: Direct fit for ISUZU NPR, NQR, NPR75, NQR71, NQR75, NQR90 models
- Length Specification: Cable overall length 3850mm (385CM)
- Quality Standard: OEM equivalent / ISO quality control
- Excessive handbrake lever travel and loose feel
- Vehicle cannot hold stationary on a slope
- Parking brake indicator light stays on or illuminates abnormally
- Handbrake lever fails to return fully after release
- Abnormally heavy handbrake operation or complete failure
| Brand | Model | Engine | Transmission | Years |
|---|---|---|---|---|
| ISUZU | NPR | 4HG1 / 4HF1 | MYY5 / MYY6 | 1999–2004 |
| ISUZU | NQR | 4HG1 / 4HK1 | MYY5 / MXA5 | 1999–2004 |
| ISUZU | NPR75 | 4HG1 / 4HK1 | MYY5 | 1999–2004 |
| ISUZU | NQR71 | 4HG1 / 4HK1 | MYY5 | 1999–2004 |
| ISUZU | NQR75 | 4HG1 / 4HK1 | MYY5 | 1999–2004 |
| ISUZU | NQR90 | 4HK1 | MYY5 | 1999–2004 |
| JMC | Compatible models | 4HG1 | MYY5 | 1999–2004 |
| QC Item | Verification Method |
|---|---|
| Cable length verification | Tape measure, standard value 3850mm |
| Wire rope tensile strength | Tensile test per industry standards |
| Sheath integrity | Visual inspection + bend test |
| End fitting dimensions | Caliper measurement against OEM specs |
| Operation smoothness | Manual pull test for binding |
| Appearance & surface defects | Visual inspection |
- Lift and safely support the vehicle; remove rear wheels for access
- Remove the old cable; note the cable routing and mounting clip positions
- Route the new cable following the original path
- Connect the rear end to the rear wheel brake parking lever
- Connect the front end to the handbrake lever
- Adjust cable tension: standard handbrake lever travel typically 5–7 clicks
- Release the handbrake and confirm rear wheels rotate freely
- Perform road test to confirm parking brake function
- Inspect cable tension and operation every 20,000 km
- Inspect cable sheath for damage every 40,000 km
- Inspect cable condition at 80,000–100,000 km
- Shorten inspection intervals for harsh operating environments