ISUZU OEM Standard Size Tail Lamp Assembly 24V Electrical System 100% Factory Tested for FVR FSR113 700P 6HK1
| Net Weight: | 0.85 Kg | Package Size: | 20 × 33 × 12 Cm |
| Operating Voltage: | 24V | Color: | Black |
| Position: | Rear Left (L) | Material: | High-strength Aluminum Alloy & Precision Bearings |
| Cooling Type: | Engine Coolant Circulation | Installation: | Direct OEM Replacement |
| High Light: | OEM Standard Size Tail Lamp Assembly,24V Electrical System Tail Lamp Assembly,100% Factory Tested Tail Lamp Assembly |
||
The Tail Lamp Assembly with OEM numbers 1-82230133-1 / 1822301331 is a verified direct-fit replacement for ISUZU FVR, FSR113, and 700P trucks equipped with the 6HK1 diesel engine. This rear combination lamp assembly (LAMP ASM RR COMB) is installed on the left rear side (L) of the vehicle and integrates brake light, turn signal, reverse light, and tail light functions, serving as a critical safety component of the truck lighting system.
- Net Weight: Approximately 0.85 kg
- Packaging Size: 20 × 33 × 12 cm
- Operating Voltage: 24V
- Color: Black
- Size: OEM Standard
- Warranty: At least 1-year warranty
- Quality Control: 100% testing before shipment
Replaces ISUZU OEM numbers: 1-82230133-0 / 1822301330, 1-82230133-DJ, 1-82230133-J, 1-82230133-L, 1-82230133-QL. Right-hand counterpart is 1-82230132-1 / 1822301321.
| Part Number: | 1-82230133-1 1822301331 |
| Product Name: | Tail Lamp |
| Car Model: | FVR FSR113 700P |
| Engine Model: | 6HK1 |
| Condition: | 100% Brand New |
| Origin: | China Mainland |
| Main Market: | Middle East, Asia, Africa, South America, North America & Europe |
When the tail lamp exhibits the following conditions, timely inspection and replacement are required:
- Brake light fails or dims: Burnt bulb or poor socket contact
- Turn signal flickers abnormally or fails: Broken filament or circuit fault
- Water ingress or fogging in lamp housing: Aged or damaged lens seal
- Lens cracked or faded: Impact damage or prolonged UV exposure
- Reverse light fails: Burnt bulb or wiring fault
| Brand | Model | Series | Engine | Note |
|---|---|---|---|---|
| ISUZU | FVR | Forward / F-Series | 6HK1 | Rear combination tail lamp, left |
| ISUZU | FSR113 | Forward / F-Series | — | Rear combination tail lamp, left |
| ISUZU | 700P | Medium-duty truck | — | Rear combination tail lamp, left |
- LH/RH Distinction: This product is the rear left (L) tail lamp assembly. Right-hand counterpart is 1-82230132-1 / 1822301321.
- Model Confirmation: Verify original tail lamp number before installation.
- Pre-Installation Verification: Please provide VIN or original tail lamp nameplate information for precise fitment confirmation.
| QC Item | Verification Method |
|---|---|
| Appearance Inspection | 100% visual inspection — no lens cracks or scratches, no housing deformation |
| Circuit Function Test | Power-on test — all lamp positions function normally |
| Sealing Test | Air/water tightness test — ensures lamp cavity sealing against water ingress |
| Mounting Hole Precision | Gauge measurement — ensures precise match with body mounting points |
| Packaging Inspection | 100% visual inspection — packaging meets transport requirements |
Testing Standard: Supplier declares 100% factory testing on every unit. Manufacturer holds ISO/TS16949 automotive quality management system certification.
- Disconnect power: Disconnect negative battery terminal before installation
- Remove old tail lamp: Open tailgate or access panel, disconnect harness connector, remove mounting bolts/nuts
- Extract old assembly: Carefully remove old tail lamp assembly without damaging body mounting holes
- Install new assembly: Align with mounting holes, hand-thread bolts first, then tighten to specified torque
- Connect harness: Insert body harness connector into tail lamp interface
- Function test: Restore battery connection and test all lighting functions
- Check sealing: Confirm no gap between lens and housing
- Every 6 months: Check tail lamp functions and inspect for water ingress or fogging
- When bulb failure or lens damage is detected: Replace promptly to avoid driving safety risks
Engine Block 5873102680 5-87310268-0 For ISUZU 100P 4JB1 Diesel Engine Parts
Engine Block 5873102680 5-87310268-0 For ISUZU 100P 4JB1 Diesel Engine Parts Part Number: 5873102680 5-87310268-0 Product Name: Engine Block Car Model: ISUZU 100P Engine Model: ISUZU 4JB1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia...
Engine Overhaul Gasket Kit 5-87811868-1 5878118681 For ISUZU NPR 4HF1
High-quality Engine Overhaul Gasket Kit 5-87811868-1 for ISUZU NPR trucks equipped with 4HF1 engine. Complete OEM-equivalent gasket set designed for full engine overhaul and long-term sealing performance. Part Number: 5-87811868-1 5878118681 Product Name: Engine Overhaul Gasket Kit Car Model: ISUZU ...
Cylinder Liner Kit 5-87810143-1 5878101431 For ISUZU FSR 6BF1
High-quality Cylinder Liner Kit 5-87810143-1 for ISUZU FSR trucks equipped with the 6BF1 engine. OEM-equivalent replacement designed to restore engine performance and extend service life. Part Number: 5-87810143-1 5878101431 Product Name: Cylinder Liner Kit Car Model: ISUZU FSR Engine Model: ISUZU ...
Water Pump Assembly With Gasket for ISUZU NPR59 4BC2 8970211711 8-97021171-1
Water Pump Assembly With Gasket for ISUZU NPR59 4BC2 8970211711 8-97021171-1 Part Number: 8970211711 8-97021171-1 Product Name: Water Pump Assembly Car Model: ISUZU NPR59 Engine Model: ISUZU 4BC2 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle ...
