ISUZU Front Door Window Regulator Manual Window Lifter with Reinforced Steel Construction OEM Standard Mounting Holes Direct Fit Verified
| Compatible Vehicle Models: | ISUZU FSR / FTR / FVR (1996–2007, Series Reference) | Engine Compatibility: | 10PE1 |
| Weight: | Approx. 1.5 Kg (to Be Confirmed) | Primary Vehicle Model: | ISUZU CXZ81 (GIGA Series) |
| Position: | Front Right (RH / Right Hand) | Material: | Reinforced Steel |
| OEM Part Number: | 1-74418144-0 / 1744181440 | Operation Type: | Manual (Hand Crank) |
| High Light: | Reinforced Steel Construction Window Regulator,OEM Standard Mounting Holes Window Lifter,Direct Fit Verified Manual Window Regulator |
||
The Front Door Window Regulator with OEM numbers 1-74418144-0 / 1744181440 is a verified direct-fit replacement for ISUZU CXZ81 (GIGA Series) equipped with the 10PE1 engine, also compatible with FSR, FTR, FVR and other F-Series heavy-duty trucks (1996–2007 model years). This manual window regulator assembly is installed on the front right door (passenger side) and operates the window glass through a hand-crank mechanism.
| Part Number | 1-74418144-0 1744181440 |
| Product Name | Front Door Window Regulator |
| Car Model | CXZ81 10PE1 |
| Engine Model | CXZ81 10PE1 |
| Condition | 100% Brand New |
| Material | High-strength aluminum alloy & precision bearings |
| Origin | China Mainland |
| Main Markets | Middle East, Asia, Africa, South America, North America & Europe |
Primary Applications:
- ISUZU CXZ81 GIGA Series (10PE1 engine) - Front right, manual
- ISUZU FSR Forward/F-Series (1996–2007)
- ISUZU FTR Forward/F-Series (1996–2007)
- ISUZU FVR Forward/F-Series (1996–2007)
- This product is the front right (RH) regulator
- This is a manual (hand-crank) window regulator and does not include a motor
- Confirm vehicle is LHD (Left-Hand Drive) before installation
- Professional installation recommended
When replacement is required:
- Window fails to raise or lower / operates with difficulty
- Abnormal noise during operation (clicking or metal friction sounds)
- Window tilts or detaches during operation
- Abnormally high crank resistance
- Window slides down on its own during driving
Professional installation recommended. Reference workshop manual procedures:
- Remove door trim panel and disconnect crank handle
- Secure window glass to prevent dropping
- Remove old regulator fixing bolts
- Install new regulator and hand-thread all bolts first
- Connect glass bracket to regulator rail
- Test manual operation for smooth movement
- Reinstall door trim panel
Torque Reference: Regulator fixing bolts recommended torque 8–12 N·m
- Every 12 months or 50,000 km: Check window lifting smoothness, apply lubricating grease as needed
- When jamming or abnormal noise is detected: Inspect regulator internal gears and rails promptly