Front Engine Foot Rubber 1-53215184-0 1532151840 For ISUZU FORWARD 800/1000 FVR FRR FVZ 6HK1 6HE1 6BG1 — OEM Engine Mounting Insulator

The Front Engine Mount (Front Engine Foot Rubber) with OEM numbers 1-53215184-0 (also listed as 1532151840) is a verified OEM-grade direct replacement for ISUZU FORWARD 800/1000, FVR, FRR, and FVZ series medium and heavy-duty trucks equipped with 6HK1, 6HE1, and 6BG1 diesel engines.

As a critical component of the chassis and powertrain system, this engine mount secures the front of the engine to the vehicle frame, absorbing engine vibrations and reducing noise transmission to the cabin, while also protecting drivetrain components and the chassis from excessive stress.

Manufactured from high-quality natural rubber bonded to high-strength steel, this engine mount is designed to withstand the demanding conditions of commercial truck operation. It is a genuine ISUZU part, meaning it is exactly the same as the one mounted at the factory when the vehicle was new.

If your front engine mount is failing, you may experience one or more of the following symptoms:

• Excessive Engine Vibration: Noticeable vibration felt through the steering wheel, floorboard, or seats
• Clunking or Thumping Noises: Metallic sounds from the front of the vehicle when accelerating, braking, or shifting gears
• Engine Movement: Visible rocking or shifting of the engine when revving or under load
• Misalignment of Drivetrain Components: Stress on exhaust pipes, hoses, and wiring due to excessive engine movement
• Transmission Shifting Issues: Worn mounts can affect alignment between engine and transmission

• Safely raise the vehicle and support it on jack stands
• Support the engine with a suitable jack or engine support bar
• CRITICAL: This is the Front engine mount – verify you are replacing the correct position
• Inspect all other engine and transmission mounts for wear – replace as necessary
• Use new mounting bolts and nuts as recommended by the workshop manual

1. Safely raise the vehicle and support it on jack stands
2. Support the engine with a jack and a block of wood placed under the oil pan
3. Remove the mounting bolts securing the old mount to the engine and frame
4. Remove the old mount and clean the mounting surfaces thoroughly
5. CRITICAL: Install the new mount with NEW bolts and nuts
6. Torque the mounting bolts to manufacturer's specified torque settings
7. Lower the engine carefully into position
8. Reinstall and torque all remaining fasteners
9. Start the engine and check for unusual vibrations or noises

• Inspection: Every 50,000 km / 12 months. Check for excessive engine movement, vibration, and visible cracking or deterioration of the rubber
• Replacement: Immediately if failure symptoms appear. Recommended to replace in pairs if the opposite side shows signs of wear

• Packaging: Each engine mount is securely packed in protective packaging to prevent shipping damage
• Single Package Size: Approx. 35 × 25 × 20 cm
• Single Package Weight: Approx. 6.0 kg
• Suitable for: Wholesale distributors, truck parts retailers, commercial vehicle repair shops, and fleet owners