OEM Standard Taper Alloy Steel Tie Rod End with Anti-Rust Coating for ISUZU CXZ 6WF1 Pump Truck Mixer Truck
| Taper: | OEM Standard Taper | Material: | Alloy Steel (per OEM Requirement, E.g., 40Cr/42CrMo) |
| Thread Type: | Per OEM Drawing; Left/right Thread Must Be Confirmed | Engine Compatibility: | 6WF1 |
| Surface Treatment: | Anti-rust Coating / Phosphating | OEM Part Number: | 1-43150857-0 / 1431508570 |
| Included Accessories: | Nut, Cotter Pin / Circlip, Etc. (subject To Actual Configuration) | Installation Position: | Outer Tie Rod End / Steering Knuckle Arm Connection |
| High Light: | OEM standard taper Tie Rod End,Alloy steel Steering Tie Rod End,Anti-rust coating Tie Rod |
||
The Tie Rod End with OEM number 1-43150857-0 (without hyphen 1431508570) is a verified direct-fit replacement for ISUZU CXZ series commercial vehicles equipped with the 6WF1 engine, widely used in pump trucks, mixer trucks, and other heavy-duty construction vehicles.
This steering tie rod end is a critical safety component that connects the tie rod to the steering knuckle arm, transmitting steering force from the steering gear to the wheel while allowing suspension movement through its ball-joint design.
- OEM Drawing Dimension Verification: Manufactured to ISUZU OEM drawings and sample dimensions
- Material & Heat Treatment Verification: Alloy steel construction with forging, quenching and tempering
- Ball Joint Performance Verification: Ball joint swing torque, axial clearance, and pull-out strength testing
- Thread Accuracy Verification: Threads inspected with go/no-go gauges
- OEM Cross-Reference Verified: Replaces 1-43150857-0 / 1431508570
| Part Number: | 1-43150857-0 1431508570 |
| Product Name: | Propeller Shaft |
| Car Model: | CXZ |
| Engine Model: | CXZ 6WF1 |
| Condition: | 100% Brand New |
| Material: | High-strength aluminum alloy & precision bearings |
| Installation: | Direct OEM replacement |
| Quality Standard: | OEM equivalent / ISO quality control |
- Excessive steering play: noticeably increased steering wheel free play
- Vehicle pulling: continuous drift to one side
- Abnormal front tire wear: uneven, scalloped, or excessive tire wear
- Steering noise: metallic clunking over bumps or during steering
- Broken dust boot / grease leakage: cracked boot and dirt ingress
- Loose ball joint: noticeable play when shaking the tire
| Brand | Model | Engine | Application |
|---|---|---|---|
| ISUZU | CXZ | 6WF1 | Pump truck, mixer truck |
- Confirm left/right, inner/outer, and thread direction before ordering
- Different years and chassis configurations may vary
- Provide VIN or chassis number for final confirmation
- Four-wheel alignment mandatory after replacement
| QC Item | Verification Method |
|---|---|
| Dimensional accuracy | CMM (Coordinate Measuring Machine) |
| Material composition | Spectrometer analysis |
| Hardness | Rockwell / Brinell hardness tester |
| Ball joint swing torque | Torque tester |
| Axial clearance | Dial indicator / special gauge |
| Pull-out strength | Universal testing machine (sampling) |
| Thread accuracy | Go/no-go thread gauges |
| Surface treatment | Salt spray test (sampling per standard) |
| Visual inspection | 100% visual — no cracks, burrs, or rust |
- Lift and safely support the vehicle; remove the wheel
- Remove the old tie rod end lock nut, cotter pin, and connecting nut
- Use a dedicated puller to separate the ball joint from the steering knuckle arm
- Clean the taper hole and threads; inspect the steering knuckle taper for wear
- Install the new tie rod end; tighten the connecting nut to specified torque
- Adjust toe and tighten the tie rod lock nut
- Perform four-wheel alignment and road test
- Inspect the dust boot for cracks and grease leakage at every service
- Check steering play every 10,000–20,000 km or per fleet maintenance schedule
- Replace immediately if noise, play, or pulling is detected
- Neutral carton/wooden case packaging with individual anti-rust bag
- Custom branded packaging available (authorization required)
- Suitable for: ISUZU truck repair shops, construction vehicle parts wholesalers, fleet maintenance departments
- MOQ: Please contact for confirmation
Engine Block 5873102680 5-87310268-0 For ISUZU 100P 4JB1 Diesel Engine Parts
Engine Block 5873102680 5-87310268-0 For ISUZU 100P 4JB1 Diesel Engine Parts Part Number: 5873102680 5-87310268-0 Product Name: Engine Block Car Model: ISUZU 100P Engine Model: ISUZU 4JB1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia...
Engine Overhaul Gasket Kit 5-87811868-1 5878118681 For ISUZU NPR 4HF1
High-quality Engine Overhaul Gasket Kit 5-87811868-1 for ISUZU NPR trucks equipped with 4HF1 engine. Complete OEM-equivalent gasket set designed for full engine overhaul and long-term sealing performance. Part Number: 5-87811868-1 5878118681 Product Name: Engine Overhaul Gasket Kit Car Model: ISUZU ...
Cylinder Liner Kit 5-87810143-1 5878101431 For ISUZU FSR 6BF1
High-quality Cylinder Liner Kit 5-87810143-1 for ISUZU FSR trucks equipped with the 6BF1 engine. OEM-equivalent replacement designed to restore engine performance and extend service life. Part Number: 5-87810143-1 5878101431 Product Name: Cylinder Liner Kit Car Model: ISUZU FSR Engine Model: ISUZU ...
Water Pump Assembly With Gasket for ISUZU NPR59 4BC2 8970211711 8-97021171-1
Water Pump Assembly With Gasket for ISUZU NPR59 4BC2 8970211711 8-97021171-1 Part Number: 8970211711 8-97021171-1 Product Name: Water Pump Assembly Car Model: ISUZU NPR59 Engine Model: ISUZU 4BC2 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle ...
