Back Door Stay Assembly Left Hand 68960-26037 6896026037 For Toyota Hiace/Regius Ace H200 2010-2014 — OEM Genuine Gas Strut For Rear Door

The Back Door Stay Assembly (STAY ASSY, BACK DOOR, LH) with Genuine Toyota OEM number 68960-26037 (also listed as 6896026037) is a verified direct-fit replacement for the Toyota Hiace and Regius Ace commercial vans. This gas spring/lift support is a critical component of the rear door mechanism, responsible for safely holding the heavy rear door open and preventing unexpected closure.

Manufactured to Toyota's stringent OEM standards, this stay assembly ensures smooth and reliable operation of the rear door. It is listed in Toyota parts catalogs for Hiace/Regius Ace models produced from August 2010 to January 2014.

If your back door stay is failing, you may experience one or more of the following symptoms:

• Door Won't Stay Open: The rear door fails to stay open and falls closed on its own
• Sagging Door: The door feels heavy and drops or sags when opened
• Unusual Noises: Grinding or hissing sounds when opening or closing the door
• Door Slams Shut: The door closes with excessive force, posing a risk of injury or damage

• Applicable to Toyota Hiace/Regius Ace models with various chassis codes including KDH2##, TRH2##, LH2##
• Compatible with both standard and high roof variants
• The part carries the Mark = C designation in Toyota parts catalogs
• This part supersedes 68960-26036
• Aftermarket alternatives like STABILUS 444347 are available with specifications of 1350N force and 770mm length

• ✅ Side -- Left Hand (LH) -- verify you are ordering the correct side
• ✅ Model -- Toyota Hiace/Regius Ace H200 only (2010-2014)
• ✅ OEM Mark -- Mark = C
• ✅ Supersession -- This part replaces 68960-26036

Please verify your vehicle's chassis code, production date, and VIN before ordering.

• CRITICAL: This is the Left-Hand (LH) side -- the RH counterpart is 68950-26037
• Support the rear door with a prop or have an assistant hold it open to prevent falling during replacement
• Inspect the mounting brackets and ball studs for damage -- replace if necessary

1. Safely support the rear door in the fully open position
2. Using a flathead screwdriver or trim tool, carefully pry the retaining clips on the old stay to release it from the ball studs
3. Remove the old stay assembly
4. CRITICAL: Install the new stay with the correct orientation (the gas cylinder body may be marked with a directional arrow)
5. Press the new stay firmly onto the ball studs until the retaining clips click securely into place
6. Test the door operation by opening and closing it several times to ensure smooth and secure function

• Packaging: Each back door stay is securely packed in Genuine Toyota OEM packaging
• Availability: Available from various Toyota parts suppliers
• Suitable for: Wholesale distributors, auto parts retailers, commercial vehicle repair shops, and fleet owners