Rear Brake Wheel Cylinder 47580-36210 4758036210 For Toyota Dyna 200 / Coaster / Toyoace 1995-2006 — OEM 1-1/8″ Rear Left Hand Cast Iron

The Rear Brake Wheel Cylinder with OEM number 47580-36210 (also listed as 4758036210) is a verified direct-fit replacement for Toyota Dyna 200 trucks, Coaster buses, and compatible Toyoace models. Manufactured to Toyota's stringent OEM specifications, this cylinder is a critical component of the rear drum brake system that converts hydraulic pressure into mechanical force for reliable stopping power.

• OEM Specification — Verified by Toyota OEM part numbers 47580-36210 and cross-references BLUE PRINT ADT34466 and AISIN WCT-066
• Precision 1-1/8″ (28.58mm) Bore — Delivers consistent hydraulic pressure for reliable braking performance
• Proven Durability — Constructed from high-grade grey cast iron — rated for 200,000+ km under normal operation
• Installation Success Rate — 99% direct bolt-on fitment confirmed across thousands of repair orders
• OEM Cross-Reference Verified — Replaces 47580-36210, 47580-37071, 47580-37072

Our manufacturing and inspection processes ensure every brake wheel cylinder meets or exceeds Toyota OEM standards.

Pre-Installation Checklist:

• Safely raise the vehicle and support it on jack stands
• Remove the rear wheels and brake drums to access the wheel cylinders
• CRITICAL: This is the Rear Left (LH) cylinder — the Rear Right (RH) counterpart is 47570-36210
• Inspect brake shoes, drums, and hardware for wear — replace as necessary
• Use new brake fluid (DOT 3 or DOT 4) from a sealed container
• Critical: Replace wheel cylinders in pairs (both rear wheels) for balanced braking performance

Installation Guidelines (Reference Toyota workshop manual):

1. Safely raise the vehicle and support it on jack stands
2. Remove the rear wheels and brake drums
3. Disconnect the brake line from the old wheel cylinder
4. Remove the mounting bolts securing the cylinder to the backing plate
5. Remove the old cylinder and clean the backing plate thoroughly
6. CRITICAL: Install the new cylinder with NEW mounting bolts
7. Torque the mounting bolts to manufacturer's specified torque settings (refer to Toyota workshop manual)
8. Reconnect the brake line and torque to specification
9. CRITICAL: Bleed the brake system thoroughly to remove all air (start with the wheel furthest from the master cylinder)
10. Refill with fresh DOT 3 or DOT 4 brake fluid
11. Reinstall the brake drums and wheels
12. Test brake pedal feel and braking performance before road test

Maintenance Schedule:

• Inspection: Every 50,000 km / 12 months. Check for fluid leaks, brake pedal feel, and braking performance
• Fluid Replacement: Every 2 years or 40,000 km — replace brake fluid to prevent internal corrosion
• Replacement: Immediately if failure symptoms appear. Replace in pairs for balanced braking

• Packaging: Each brake wheel cylinder is securely packed in protective packaging to prevent shipping damage
• Single Package Weight: Approx. 1.286 kg
• Suitable for: Wholesale distributors, bus parts retailers, commercial vehicle repair shops, and fleet owners