Rear Hub Outer Bearing 1-09812079-0 For ISUZU CVR CXZ96 Truck 1098120790

Heavy-duty rear hub outer bearing supports the wheel hub, ensuring smooth rotation and precise axle alignment for reliable performance in ISUZU CVR and CXZ96 trucks.

The Rear Hub Outer Bearing (OEM Numbers: 1-09812079-0 / 1098120790) is a premium-quality, direct replacement drivetrain component designed for ISUZU CVR, CXZ96, and compatible heavy-duty trucks. This precision-engineered bearing is installed in the outer position of the rear wheel hub assembly, where it supports the hub and wheel, enabling smooth rotation while maintaining proper axle alignment and load distribution.

• OE Quality: Manufactured to strict ISUZU dimensional and material specifications for perfect fit and function
• Precision-Ground Components: Rolling elements and races ground to exacting tolerances for smooth, quiet operation
• Heat-Treated Steel: Provides exceptional wear resistance and durability under heavy loads
• Tapered Roller Design: Efficiently handles both radial and thrust loads for reliable performance
• Improved Sealing: Enhanced seals reduce friction and protect against contamination
• Synthetic Lubricant: High-quality lubricant inhibits rust and prevents corrosion indentation
• Supports Heavy Loads: Engineered to withstand the demands of heavy-duty commercial operation
• Restores Smooth Operation: Eliminates wheel wobble, noise, and vibration caused by worn bearings
• Extends Tire Life: Proper bearing function prevents uneven tire wear
• Direct Replacement: Simple installation during rear axle or brake service
• Long Service Life: Built for durability in demanding commercial applications
• Essential Safety Component: Critical for safe, reliable vehicle operation

This rear hub outer bearing is specifically designed for ISUZU heavy-duty trucks and compatible equipment.

• ISUZU CVR - Heavy-Duty Trucks
• ISUZU CXZ96 - Heavy-Duty Trucks
• ISUZU CYZ - Heavy-Duty Trucks
• ISUZU CXZ - Heavy-Duty Trucks
• ISUZU EXZ - Heavy-Duty Trucks
• ISUZU FVR - Heavy-Duty Trucks

• 6WF1 - Diesel Engine
• 10PE1 - Diesel Engine
• 6WA1 - Diesel Engine
• 6WG1 - Diesel Engine

• Outer rear wheel hub position
• Suitable for both left and right rear hubs (identical part)

Professional installation required. Proper bearing service is critical for safety:

1. Raise and secure the vehicle - Safely lift the rear axle and support on jack stands
2. Remove the rear wheels - Remove the rear wheels, brake drums, and hub assembly
3. Remove the axle nut - Locate the axle nut at the center of the hub and remove it
4. Remove the hub - Carefully remove the hub from the axle
5. Remove the old outer bearing - Carefully remove the old bearing from the hub using a bearing puller
6. Clean the hub bore - Thoroughly clean the hub bore, removing all old grease and debris
7. Inspect the hub and axle spindle - Check for scoring, pitting, or wear; repair or replace components as needed
8. Prepare the new bearing - Apply a thin coat of high-quality wheel bearing grease to the bearing
9. Install the new bearing - Press the new bearing into the hub bore using a proper bearing installation tool
10. Reinstall seals - Install new seals and components
11. Pack the hub with grease - Fill the hub cavity with the recommended grease
12. Install the hub assembly - Mount the hub onto the axle spindle
13. Install the inner bearing and seal - Install the inner bearing and new oil seal
14. Adjust bearing preload - Tighten the bearing nut to the specified torque and set end-play per service manual
15. Install the locking device - Install the cotter pin or locking tab to secure the bearing nut
16. Reinstall brake components and wheels - Reinstall the brake drums and wheels
17. Lower the vehicle - Lower the vehicle to the ground
18. Test operation - Test drive the vehicle and check for smooth operation and bearing noise

• Material Verification: Confirms GCR15 or high-quality carbon steel composition meets OE strength and durability specifications
• Dimensional Inspection: Inner diameter (90mm), outer diameter (160mm), and height (42.5mm) verified against OEM tolerances
• Hardness Testing: Bearing surfaces verified for proper heat treatment and wear resistance
• Surface Finish Inspection: Polished surfaces checked for proper finish and smoothness
• Seal Integrity Testing: Sealing performance verified to prevent contamination
• Running Quality Testing: Bearing smoothness and noise level verified
• Visual Inspection: 100% checked for defects, machining flaws, or damage
• Packaged Safely: Protected and securely packaged to prevent contamination and damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea