Brake Proportioning Valve 47910-34730 For Toyota Tundra 2000-2006 4791034730

Precision-engineered load-sensing brake proportioning valve automatically adjusts rear brake pressure based on vehicle load, ensuring balanced, safe braking for Toyota Tundra trucks.

• OE Quality: Manufactured to strict Toyota dimensional and material specifications for perfect fit and function
• Load-Sensing Design: Automatically adjusts rear brake pressure based on vehicle load for balanced braking
• Durable Construction: Corrosion-resistant materials withstand high pressures and harsh conditions
• Direct Replacement: Simple bolt-on installation with no modifications required
• Restores Braking Performance: Eliminates uneven braking and rear wheel lock-up caused by faulty valves
• Enhances Safety: Proper brake proportioning ensures stable, controlled stopping
• Long Service Life: Engineered for reliability in demanding driving conditions

Compatible Models:

• Toyota Tundra — 2000-2006
• Toyota Tundra Base — 2006
• Toyota Tundra SR5 — 2000

Compatible Engine Options:

• 3.4L V6 — EFI
• 4.0L V6
• 4.7L V8

Compatible Chassis Codes:

• UCK40L, UCK41L, UCK30L, UCK31L, VCK40L, VCK30L, GSK30L

Professional installation required. Brake system safety is critical:

1. Disconnect battery — Disconnect the negative battery cable before beginning work
2. Raise and secure the vehicle — Safely lift the vehicle and support on jack stands
3. Locate the proportioning valve — Identify the valve on the frame rail (typically near the rear axle)
4. Disconnect brake lines — Carefully disconnect the brake fluid lines from the valve
5. Remove the old valve — Unbolt and remove the old proportioning valve
6. Inspect brake lines — Check brake lines and fittings for corrosion or damage; replace if necessary
7. Clean mounting area — Clean the mounting surface and surrounding area
8. Prepare the new valve — Inspect the new valve and verify it matches the original
9. Install the new valve — Position the new valve and secure with mounting bolts
10. Reconnect brake lines — Reconnect the brake lines to the new valve
11. Torque to specification — Tighten fittings and bolts to manufacturer specification
12. Fill with brake fluid — Fill the master cylinder reservoir with the recommended brake fluid
13. Bleed the brake system — Bleed the entire brake system to remove all air
14. Check pedal feel — Test the brake pedal for proper feel and travel
15. Reconnect battery — Reconnect the negative battery cable
16. Test operation — Test drive the vehicle at low speed to verify proper braking performance
17. Check for leaks — Inspect all connections for brake fluid leakage

• Material Verification: Confirms housing and internal component materials meet OE specifications
• Dimensional Inspection: Mounting points, port threads, and overall dimensions verified against OEM tolerances
• Pressure Testing: 100% tested for hydraulic pressure integrity and leak-free operation
• Calibration Testing: Load-sensing response and proportioning characteristics verified to OE specifications
• Visual Inspection: 100% checked for casting defects, machining flaws, or damage
• Packaged Safely: Protected and securely packaged to prevent damage during transit

For pricing, availability, or bulk purchase of the Brake Proportioning Valve 47910-34730 For Toyota Tundra 2000-2006, please contact our sales team for a competitive quote and expert technical support.