Front Brake Wheel Cylinder 47530-37081 4753037081 For Toyota DYNA 200 / COASTER / TOYOACE — OEM Left Hand 1-3/16″ Bore Drum Brake Cylinder
| OEM Part Number: | 47530-37081 / 4753037081 | Part Name: | CYLINDER ASSY, FRONT WHEEL BRAKE, LH (FOR FRONT OR UPPER) |
| Fitting Position: | Front Axle, Left Hand (LH) | Bore Diameter: | 1-3/16″ (30.16mm) |
| Material: | High-Grade Cast Iron / Aluminium | Inlet Thread Size: | M10 X 1.0 |
| Bleeder Screw: | Included | Vehicle Compatibility: | Toyota DYNA 200, COASTER, TOYOACE, Hino Dutro/Saurus |
| Condition: | Brand New — 100% Quality Inspected | Warranty: | 12 Months |
| High Light: | Toyota DYNA brake wheel cylinder,OEM drum brake cylinder,Left hand 1-3/16 bore cylinder |
||
The Front Brake Wheel Cylinder (CYLINDER ASSY, FRONT WHEEL BRAKE, LH) with Genuine Toyota OEM number 47530-37081 (also listed as 4753037081) is a verified direct-fit replacement for Toyota DYNA 200, COASTER, and TOYOACE trucks, as well as Hino Dutro/Saurus models.
If your front brake wheel cylinder is failing, you may experience one or more of the following symptoms:
- Brake Fluid Leakage: Visible fluid seeping from the front wheels or inside the brake drum
- Soft or Spongy Brake Pedal: Pedal feels unusually soft or goes to the floor
- Reduced Braking Performance: Vehicle takes longer to stop or requires increased pedal pressure
- Uneven Braking: Vehicle pulls to one side during braking
- Contaminated Brake Shoes: Brake fluid soaking into the brake shoes, causing reduced friction
| Brand | Model | Chassis / Series | Years / Notes |
|---|---|---|---|
| Toyota | DYNA 200 | BU6#, BU7#, BU8#, BU9#-2 | 1988-1995 |
| Toyota | DYNA 200 | BU10#, BU112, BU12#, BU13#, BU14#- | 1995 onwards |
| Toyota | COASTER | BB4#, BB5#, BZB40, BZB50, HZB50- | Various |
| Toyota | TOYOACE | XZU130, XZU140- | Various |
| Hino | Dutro / Saurus | 125 Double RR- | Various |
| Feature | Benefit + Verification Signal |
|---|---|
| OEM Specification — Toyota Genuine Equivalent | Guarantees factory-fit quality and performance — verified by OEM part number 47530-37081 |
| Precision 1-3/16″ (30.16mm) Bore | Delivers consistent hydraulic pressure for reliable braking performance |
| High-Grade Cast Iron / Aluminium Construction | Provides exceptional durability and heat dissipation under demanding commercial conditions |
| Bleeder Screw Included | Complete replacement solution — no need to purchase additional hardware |
| Direct Bolt-On Fitment | No modifications required — engineered as a direct match for the original cylinder |
| 100% Pressure Tested | Guarantees dependable operation and leak-free performance |
| 100% New — No Core Charge | Guarantees zero wear, immediate braking performance, and full service life |
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify 1-3/16″ (30.16mm) bore diameter and mounting specifications |
| Material Composition | Cast iron/aluminium analysis to verify structural integrity and heat dissipation |
| Bore Surface Test | 100% surface testing to ensure optimum sealing surface for pressure cups |
| Leakage Test | 100% hydraulic pressure test to guarantee zero fluid leakage |
| Rubber Component Test | EPDM material verification for heat and corrosion resistance |
| Durability Cycle Test | 500+ hour fatigue testing to verify long-term reliability |
| Final Assembly Inspection | 100% visual and functional inspection before packaging |
- Safely raise the vehicle and support it on jack stands
- Remove the front wheels and brake drums
- CRITICAL: This is the Front Left (LH) cylinder
- Inspect brake shoes, drums, and hardware for wear
- Use new brake fluid (DOT 3 or DOT 4) from a sealed container
- Critical: Replace wheel cylinders in pairs for balanced braking
- Inspection: Every 50,000 km / 12 months
- Fluid Replacement: Every 2 years or 40,000 km
- Replacement: Immediately if failure symptoms appear
- Packaging: Protective packaging to prevent shipping damage
- Package Contents: 1 Brake Wheel Cylinder (Bleeder screw included)
- Suitable for: Wholesale distributors, truck parts retailers, commercial vehicle repair shops, and fleet owners
Rear Brake Wheel Cylinder 47550-37101 4755037101 For Toyota DYNA 200 / COASTER / TOYOACE — OEM Rear Right 30mm Bore Drum Brake Cylinder
Rear Brake Wheel Cylinder 47550-37101 4755037101 For Toyota DYNA 200 / COASTER / TOYOACE Product Overview OEM Rear Right 30mm Bore Drum Brake Cylinder designed for Toyota DYNA 200, COASTER, and TOYOACE trucks, as well as compatible Hino models. Manufactured to Toyota's stringent OEM specifications, ...
Front Brake Wheel Cylinder 47540-37101 4754037101 For Toyota DYNA 200 / COASTER / TOYOACE — OEM Left Hand 1-3/16″ Bore Drum Brake Cylinder
Front Brake Wheel Cylinder 47540-37101 4754037101 For Toyota DYNA 200 / COASTER / TOYOACE — OEM Left Hand 1-3/16″ Bore Drum Brake Cylinder Product Overview Front Brake Wheel Cylinder 47540-37101 for Toyota DYNA/COASTER — OEM LH 1-3/16″ The Front Brake Wheel Cylinder (CYLINDER ASSY, FRONT WHEEL BRAKE...
Genuine OEM Brake Master Cylinder 47201-26870 4720126870 For Toyota Hiace H300 2.8L Diesel 2019-2026 — Japan Spec Tandem Hydraulic Cylinder
Genuine OEM Brake Master Cylinder 47201-26870 4720126870 For Toyota Hiace H300 2.8L Diesel 2019-2026 — Japan Spec Tandem Hydraulic Cylinder Product Overview The Brake Master Cylinder Assembly with Genuine Toyota OEM number 47201-26870 (also listed as 4720126870) is a verified direct-fit replacement ...
Synchronizer Ring Set 33038-36010 3303836010 For Toyota DYNA 200 / COASTER / TOYOACE G25 5-Speed Manual Transmission — OEM Replacement
Synchronizer Ring Set 33038-36010 3303836010 For Toyota DYNA 200 / COASTER / TOYOACE G25 5-Speed Manual Transmission — OEM Replacement Product Description The Synchronizer Ring Set (RING SET, SYNCHRONIZER, NO.2) with OEM number 33038-36010 (also listed as 3303836010) is a verified direct-fit ...
