Front Brake Wheel Cylinder 8-97358876-0 8973588760 8-98081293-0 For ISUZU NPR NQR 700P 4HK1 5.2L Diesel — OEM Front Left Cast Iron 30.16mm Bore

The Front Brake Wheel Cylinder with OEM numbers 8-97358876-0 (also listed as 8973588760) and 8-98081293-0 (also listed as 8980812930) is a verified OEM-grade direct replacement for ISUZU NPR, NQR, 700P, and compatible N-Series trucks equipped with the 4HK1 5.2L diesel engine. Manufactured to ISUZU's stringent OEM specifications, this wheel cylinder is a critical component of the front drum brake system that converts hydraulic pressure into mechanical force for safe and reliable stopping power.

• OEM Specification — Verified by ISUZU OEM part numbers 8-97358876-0, 8973588760, 8-98081293-0, and 8980812930
• Precision 1-3/16″ (30.16mm) Bore — Delivers consistent hydraulic pressure for reliable braking performance
• Proven Durability — Constructed from high-grade cast iron for superior heat and corrosion resistance
• Broad Compatibility — Fits ISUZU NPR, NQR, 700P, ELF models with 4HK1 engine

If your front brake wheel cylinder is failing, you may experience one or more of the following symptoms:

• Brake Fluid Leakage: Visible fluid seeping from the front wheels or inside the brake drum
• Soft or Spongy Brake Pedal: Pedal feels unusually soft or goes to the floor
• Reduced Braking Performance: Vehicle takes longer to stop or requires increased pedal pressure
• Uneven Braking: Vehicle pulls to one side during braking
• Contaminated Brake Shoes: Brake fluid soaking into the brake shoes, causing reduced friction

Pre-Installation Checklist:

• Safely raise the vehicle and support it on jack stands
• Remove the front wheels and brake drums to access the wheel cylinders
• CRITICAL: This is the Front Left (LH) cylinder — the RH counterpart is 8-97358877-0 / 8973588770
• Inspect brake shoes, drums, and hardware for wear — replace as necessary
• Use new brake fluid (DOT 3 or DOT 4) from a sealed container
• Critical: Replace wheel cylinders in pairs (both front wheels) for balanced braking performance

Installation Guidelines (Reference ISUZU workshop manual):

1. Safely raise the vehicle and support it on jack stands
2. Remove the front wheels and brake drums
3. Disconnect the brake line from the old wheel cylinder
4. Remove the mounting bolts securing the cylinder to the backing plate
5. Remove the old cylinder and clean the backing plate thoroughly
6. CRITICAL: Install the new cylinder with NEW mounting bolts
7. Torque the mounting bolts to manufacturer's specified torque settings
8. Reconnect the brake line and torque to specification
9. CRITICAL: Bleed the brake system thoroughly to remove all air
10. Refill with fresh DOT 3 or DOT 4 brake fluid
11. Reinstall the brake drums and wheels
12. Test brake pedal feel and braking performance before road test

Maintenance Schedule:

• Inspection: Every 50,000 km / 12 months. Check for fluid leaks, brake pedal feel, and braking performance
• Fluid Replacement: Every 2 years or 40,000 km — replace brake fluid to prevent internal corrosion
• Replacement: Immediately if failure symptoms appear. Replace in pairs for balanced braking

• Packaging: Each brake wheel cylinder is securely packed in protective packaging
• Package Contents: 1 Brake Wheel Cylinder (Bleeder screw included)
• Shipping Ports: NINGBO, SHANGHAI
• Suitable for: Wholesale distributors, truck parts retailers, commercial vehicle repair shops, and fleet owners