High-Strength Forged Alloy Steel Connecting Rod Assembly with Precision-Ground Bearing Surfaces for HINO N04C Diesel Engine

Precision-forged connecting rod assembly connects the piston to the crankshaft, converting reciprocating motion into rotary motion for efficient power delivery in HINO N04C diesel engines.

The Connecting Rod Assembly (OEM Number: 13260-E0050) is a premium-quality, direct replacement engine component designed for the HINO N04C 4.0L four-cylinder diesel engine. This precision-engineered connecting rod is a critical component of the engine's reciprocating assembly, responsible for connecting the piston to the crankshaft and converting the linear reciprocating motion of the piston into the rotary motion of the crankshaft.

• OE Quality: Manufactured to strict HINO/Toyota dimensional and material specifications for perfect fit and function
• Precision Forged Construction: High-strength alloy steel forging provides exceptional durability and fatigue resistance
• Precision Machining: Bearing surfaces ground to exacting tolerances for proper fitment and reliable operation
• Direct Replacement: Supersedes earlier part number 13201-78030
• Restores Engine Balance: Replaces worn or damaged rods to restore proper engine balance and smooth operation
• Ensures Reliable Power Transfer: Proper connecting rod function is essential for efficient power delivery
• Long Service Life: Engineered to withstand the extreme forces of diesel engine operation
• Essential Component: Critical for engine reliability and performance

This connecting rod assembly is specifically designed for vehicles equipped with the HINO N04C engine.

• HINO 300 Series
• HINO Dutro
• HINO 500 Series (select models with N04C engine)

• Toyota Dyna
• Toyota ToyoAce
• Toyota Coaster

• 4-Cylinder, Inline Diesel
• Displacement: 4.0L (4004cc)
• Turbocharged, Common Rail
• Power Output: Approx. 136 HP (100 kW) @ 2,500 rpm
• Valvetrain: 4 Valves per Cylinder
• Widely used in HINO 300 Series and light/medium-duty trucks

Professional installation required. Proper assembly is critical for engine reliability:

1. Disconnect battery – Disconnect the negative battery cable before beginning work
2. Drain engine oil and coolant – Drain fluids as necessary
3. Remove the cylinder head – Remove the cylinder head for access to the piston and connecting rod
4. Remove the oil pan – Remove the oil pan for access to the crankshaft and connecting rod bolts
5. Remove the old connecting rod – Mark the cylinder position, remove the connecting rod cap, and carefully push the piston/rod assembly out
6. Inspect the crankshaft journal – Check for wear, scoring, or damage; polish or replace if necessary
7. Inspect the piston pin – Check for wear or damage; replace if necessary
8. Clean thoroughly – Clean all components and oil passages
9. Prepare the new connecting rod – Inspect the new rod and verify it matches the original
10. Install new bearings – Install new connecting rod bearings (upper and lower)
11. Install the piston and rod assembly – Carefully install the piston/rod assembly into the cylinder
12. Install the connecting rod cap – Install the rod cap and torque bolts to manufacturer specification
13. Check bearing clearance – Verify bearing clearance using plastigauge (per service manual)
14. Reinstall the oil pan – Install the oil pan with a new gasket
15. Reinstall the cylinder head – Install the cylinder head with a new head gasket
16. Refill fluids – Refill with the correct type and grade of engine oil and coolant
17. Reconnect battery – Reconnect the negative battery cable
18. Start the engine – Start the engine and check for unusual noise or vibration
19. Break-in procedure – Follow the manufacturer's recommended break-in procedure

• Material Verification: Confirms forged alloy steel composition meets OE strength and durability specifications
• Dimensional Inspection: Center-to-center length, big end bore, small end bore, and overall dimensions verified against OEM tolerances
• Surface Finish Inspection: Bearing surfaces checked for proper finish and roundness
• Hardness Testing: Material hardness verified for wear resistance and durability
• Crack Detection: Non-destructive testing for forging defects or cracks
• Visual Inspection: 100% checked for defects, machining flaws, or damage
• Packaged Safely: Protected and securely packaged to prevent damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Connecting Rod Assembly 13260-E0050 For HINO N04C 4.0L Engine HINO Truck Parts, please contact our sales team for a competitive quote and expert technical support.