ISUZU Front Hub Oil Seal 73×90×8mm NBR/FKM Material ISO/TS16949 Certified for NKR77 4JH1
Key Attributes
Product Summary
ISUZU Front Hub Oil Seal 8-94248117-1 (8942481171) — 73×90×8mm OEM replacement for NKR77, NPR, NQR, ELF & other models with 4JH1/4HK1 engines. High-quality NBR/FKM material withstands -20°C~250°C, ISO/TS16949 certified, 100% tested for zero leakage. Ensures grease retention and contaminant barrier for extended bearing life.
Product Details
73×90×8mm Front Hub Oil Seal
,NBR/FKM Material Wheel Seal
,ISO/TS16949 Certified Hub Seal
- Grease Retention: Seal lip tightly contacts rotating spindle surface to prevent centrifugal leakage during high-speed rotation
- Contaminant Barrier: Dust lip and main sealing lip block water, mud, dust, and other contaminants from entering bearing cavity
- Lubriion Maintenance: Ensures wheel bearings remain in clean, well-lubried environment to reduce friction and wear
- Extended Component Life: Protects expensive wheel bearings from premature failure caused by lubriion loss or contamination
| Symptom | Probable Cause |
|---|---|
| Grease leakage around hub or brake area | Worn, aged, or damaged seal lip; seal failure |
| "Humming" or "grinding" noise from front wheels | Insufficient bearing lubriion due to grease leakage |
| Heavy steering feel or vague handling | Increased bearing resistance due to poor lubriion |
| Front wheel wobble or vibration during driving | Worn bearings causing excessive hub play |
| Abnormal hub overheating after long drives | Increased friction from lubricant loss or contamination |
| Brand | Model Series | Compatible Engine |
|---|---|---|
| ISUZU | NKR77, NKR, ELF | 4JH1 |
| ISUZU | NPR, NQR | 4HK1, 4HF1, 4HG1 |
| ISUZU | 100P | 4JB1 |
| ISUZU | 600P | 4KH1 |
| ISUZU | 700P | 4HK1 |
| JMC | 1030 | 4JB1 |
- Verify specific part number on original component before ordering
- Replace front hub oil seals in pairs (left and right) for consistent performance
- Sealing lip must face inward toward bearing cavity during installation
- Use special press tool for installation - do not use hammer directly on seal
- Apply grease to seal lip before installation to prevent dry running damage
- Inspect spindle surface for scratches, rust, or wear grooves before installation
- Professional installation recommended for this critical component
| Packaging | Neutral packaging or customized per customer request |
| Quantity per package | 1 pc/box (standard shipment packaging) |
| Minimum Order Quantity | 10 pieces |
| Delivery Time | 5-8 working days |
| Supply Capacity | 1000 sets/month |
| Payment Terms | L/C, D/A, D/P, T/T, Western Union |