OEM 45410-36030 Center Arm Bracket for Toyota Coaster - High-Grade Iron/Steel Construction with Direct Bolt-On Fitment

The Center Arm Bracket (BRACKET ASSY, CENTER ARM) with OEM number 45410-36030 is a verified direct-fit replacement for Toyota Coaster buses and compatible heavy-duty Toyota platforms. As a critical component of the vehicle's steering linkage system, this bracket securely mounts the center arm, which works in conjunction with the idler arm and tie rods to translate steering wheel input into precise wheel movement.

If your center arm bracket is failing, you may experience one or more of the following symptoms:

• Loose or Wandering Steering: Vehicle feels unstable and requires constant steering corrections
• Clunking Noise: Metallic knocking sounds from the front suspension when turning or going over bumps
• Uneven Tire Wear: Premature or irregular tire wear patterns due to misaligned steering geometry
• Reduced Steering Response: Noticeable delay or vagueness in steering input
• Visible Damage or Corrosion: Cracks, bends, or excessive rust on the bracket

Primary Applications:

Our manufacturing and inspection processes ensure every center arm bracket meets or exceeds Toyota OEM standards.

Pre-Installation Checklist:

• Safely raise the vehicle and support it on jack stands
• Inspect the center arm, idler arm, and tie rods for wear — replace as necessary
• A front-end alignment is required after installation
• Use new mounting bolts and nuts — they are torque-to-yield and must be replaced

Installation Guidelines (Reference Toyota workshop manual):

1. Safely raise the vehicle and support it on jack stands
2. Remove the center arm from the bracket
3. Remove the mounting bolts securing the bracket to the frame
4. Remove the old bracket
5. Clean the mounting surface thoroughly
6. CRITICAL: Install the new bracket with NEW mounting bolts
7. Torque the mounting bolts to manufacturer's specified torque settings
8. Install the center arm onto the new bracket
9. CRITICAL: Perform a front-end alignment to ensure correct steering geometry
10. Test drive to verify steering stability and check for unusual noises

Maintenance Schedule:

• Inspection: Every 50,000 km / 12 months. Check for steering play, clunking noises, and visible damage
• Replacement: Immediately if failure symptoms appear
• Note: This bracket is subject to wear in high-mileage commercial vehicles — proactive inspection is recommended

• Packaging: Each center arm bracket is securely packed in a carton or wooden box
• Packaging Options: Neutral Packing / Customized Packaging
• MOQ: 1 piece
• Delivery Time: 7-15 days
• Port: Guangzhou Port / Foshan Port
• Suitable for: Wholesale distributors, bus parts retailers, commercial vehicle repair shops, and fleet owners