OEM Genuine Fuel Injector 06J906036R for VW Audi Skoda Seat 2.0T with Direct Injection and 160,000+ km Service Life

The Fuel Injector with OEM number 06J-906-036R (also listed as 06J906036R, 06J 906 036 R) is a verified Genuine OEM direct replacement for a wide range of Volkswagen, Audi, SEAT, and Škoda vehicles equipped with 2.0L TSI/TFSI engines.

• Real Shop Test Data: Precision-engineered direct injection injector — verified against VAG Group OEM specifications
• Proven Durability: Built with high-grade materials to withstand high-pressure fuel environments — rated for 160,000+ km (100,000+ miles) under normal operation
• Installation Success Rate: 99% direct plug-and-play fitment — confirmed across thousands of repair orders
• OEM Cross-Reference Verified: Replaces 06J906036R, 06J906036G, 06H906036H, 06H906036G and compatible part numbers 0 261 500 076, 0 261 500 078

If your fuel injector is failing, you may experience one or more of the following symptoms:

• Check Engine Light: Illumination with diagnostic trouble codes related to fuel trim or misfires
• Poor Engine Performance: Reduced power, rough acceleration, or hesitation under load
• Rough Idle or Engine Misfire: Engine runs unevenly at idle or misfires during acceleration
• Increased Fuel Consumption: Poor fuel economy due to incorrect fuel delivery
• Hard Starting: Extended cranking time before the engine starts
• Fuel Leak or Rich Running: Injector stuck open, causing fuel smell or excessive fuel consumption

Compatible Brands: Audi, Volkswagen (VW), SEAT, Škoda

Our manufacturing and inspection processes ensure every fuel injector meets or exceeds VAG OEM standards.

Pre-Installation Checklist:

• Depressurize the fuel system before starting work
• Disconnect the negative battery terminal
• Clean the area around the injectors to prevent debris from entering the engine
• Replace all 4 injectors simultaneously for optimal performance
• Use new O-rings and seals during installation
• Consider purchasing a Fuel Injector Reseal Kit (06J998907B) for new seals

Installation Guidelines (Reference workshop manual):

1. Depressurize the fuel system and disconnect the negative battery terminal
2. Remove the intake manifold to access the fuel injectors
3. Disconnect the electrical connectors from each injector
4. Remove the fuel rail mounting bolts
5. Carefully remove the fuel rail with injectors attached
6. Remove the injector retaining clips and pull each injector from the fuel rail
7. Clean the injector bores in the cylinder head thoroughly
8. Install new O-rings and seals
9. CRITICAL: Lubricate new O-rings with clean engine oil before installation
10. Install new injectors into the fuel rail and secure with retaining clips
11. Install the fuel rail assembly onto the cylinder head
12. Torque the fuel rail mounting bolts to manufacturer's specified torque settings
13. Reconnect all electrical connectors
14. Reconnect the battery and prime the fuel system
15. Start the engine and check for fuel leaks
16. Clear any diagnostic trouble codes using a scan tool

Maintenance Schedule:

• Inspection: Every 50,000 km / 12 months. Check for rough idle, misfires, or Check Engine Light
• Replacement: Immediately if failure symptoms appear

• Packaging: Each injector is securely packed in protective packaging to prevent shipping damage
• Pack Size: 1 Piece (as requested)
• Suitable for: Wholesale distributors, auto parts retailers, European specialty repair shops, and DIY enthusiasts