Engine Oil Pan with Corrosion-Resistant Black Coating for EA888 Gen2 Engines — OEM Steel Lower Sump
| OEM Part Number: | 06J-103-600H / 06J103600H / 06J 103 600H | Width: | 11.61" (295mm) |
| Sump Style: | Wet | Sump Location: | Front Sump |
| Material: | Steel With Corrosion-Resistant Black Coating | Drain Plug Thread: | M14x1.5 |
| Length: | 16.14" (410mm) | Oil Pan Depth: | 2.76" (70mm) |
| High Light: | Corrosion-Resistant Black Coating Engine Oil Pan,EA888 Gen2 Engine Compatibility Oil Sump,OEM Specification Lower Sump |
||
The Engine Oil Pan (Lower Sump) with OEM number 06J-103-600H (also listed as 06J103600H, 06J 103 600H) is a verified OEM-grade direct replacement for a wide range of Audi, Volkswagen, SEAT, and Škoda vehicles equipped with EA888 Gen2 (1.8L / 2.0L TSI/TFSI) engines.
- Real Shop Test Data: Precision-engineered steel construction with corrosion-resistant black coating
- Proven Durability: Rated for 160,000+ km (100,000+ miles) under normal operation
- Installation Success Rate: 99% direct bolt-on fitment
- OEM Cross-Reference Verified: Replaces 06J103600E, 06J103600G, 06J103600T, 06J103600AF
- Visible oil leakage under the vehicle
- Unexplained drop in oil level between service intervals
- Oil pressure warning light illumination
- Engine knocking noise indicating oil starvation
- Visible dents, cracks, or rust perforation on oil pan
Warning: A damaged oil pan can lead to rapid oil loss and catastrophic engine failure.
Compatible Brands: Audi, Volkswagen (VW), SEAT, Škoda
| Model | Generation / Chassis | Engine | Years |
|---|---|---|---|
| Audi A3 | 8P | 1.8 / 2.0 TFSI | 2004-2012 |
| Audi S3 | 8P | 2.0 TFSI | 2004, 2008-2012 |
| Audi TT | 8J | 2.0 TFSI | 2007-2014 |
| Audi Q3 | 8U | 2.0 TFSI | 2013-2018 |
| Model | Generation | Engine | Years |
|---|---|---|---|
| Beetle | -- | 1.8T / 2.0T | 2011-2017 |
| CC | -- | 1.8 / 2.0 TSI | 2009-2017 |
| Eos | -- | 2.0 TSI | 2007-2016 |
| Golf GTI | Mk5 / Mk6 | 2.0 TSI | 2008-2014 |
| Jetta | Mk5 / Mk6 | 1.8T / 2.0T | 2005, 2008-2010 |
| Passat | B6 / B7 | 1.8 / 2.0 TSI | 2006-2017 |
| Tiguan | 5N | 2.0 TSI | 2009-2018 |
- Designed for EA888 Gen2 (1.8L / 2.0L TSI/TFSI) engine family
- Does NOT include an oil level sensor hole
- Gasket not included — must be purchased separately
- This is the lower oil pan — does not include upper oil pan/windage tray
- Verify your vehicle's VIN, model year, and engine code before ordering
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify specifications match OE blueprint |
| Material Hardness | Steel gauge and coating thickness verification |
| Leakage Test | 100% pressure testing to guarantee zero oil leakage |
| Thread Inspection | Precision inspection of M14x1.5 drain plug threads |
| Coating Adhesion Test | Cross-hatch testing to verify coating durability |
| Final Assembly Inspection | 100% visual and dimensional inspection |
- Allow engine to cool completely
- Drain engine oil completely before removal
- Purchase new oil pan gasket or sealant separately
- Inspect oil pickup tube and oil level sensor for damage
- Safely raise vehicle and support on jack stands
- Drain engine oil and remove oil filter if necessary
- Remove oil pan mounting bolts in correct sequence
- Carefully remove oil pan and old gasket/sealant
- Clean sealing surfaces thoroughly with appropriate solvent
- Ensure surfaces are completely dry and free of oil residue
- Apply new sealant or install new gasket
- Install new oil pan and hand-tighten mounting bolts
- Torque mounting bolts in correct sequence to manufacturer specifications
- Install new drain plug with new sealing washer
- Refill with fresh engine oil to correct level
- Start engine and check for oil leaks
- Inspect oil level after engine reaches operating temperature
- Inspection: During routine oil changes
- Replacement: Immediately if oil leaks are detected or pan shows damage
- Note: Always use new drain plug sealing washer during oil changes
- Packaging: Securely packed in protective packaging
- Includes: Oil pan only — gasket, bolts, and drain plug not included
- Suitable for: Wholesale distributors, auto parts retailers, European specialty repair shops, and DIY enthusiasts
OEM Specification Water Pump Thermostat Assembly for EA888 Gen3 Engines with 113 °C Thermostat Opening Temperature
OEM-grade water pump/thermostat assembly 06K121111J for EA888 Gen3 engines. Features 113°C thermostat, includes union connector & O-rings. Direct plug-and-play fitment with 99% success rate. Manufactured by INA/Pierburg to VAG specifications. 12-month warranty, 100% new condition.
OEM Specification Oil Separator PCV Valve for EA888 Gen3 Engine with 24-Month Warranty
OEM Oil Separator 06K103495AG for Audi, VW, Skoda, Seat EA888 Gen3 1.8/2.0T engines. Direct plug-and-play replacement with included gasket, 99% fitment success. High-quality materials withstand heat and oil exposure. Restores emission control, reduces oil consumption. Backed by 24-month warranty.
Genuine OEM Mass Air Flow Sensor with Hot-Film Technology for 2.0L TSI/TFSI Engines
Genuine VW OEM Mass Air Flow Sensor 06J-906-461-B for 2.0L TSI/TFSI engines. Hot-film technology ensures precise air measurement, optimal fuel efficiency, and 160,000+ km durability. Direct plug-and-play fitment for VW, Audi, SEAT, Škoda vehicles with 12-month warranty.
Oxygen Sensor Lambda Sensor with Zirconium & Yttrium Oxide Ceramic Element 6-Pin Connector and Wideband Heated Planar for Audi A3 VW Passat 2.0T
OEM-grade front oxygen sensor 06J906262AA for Audi/VW 2.0T TSI engines. Features zirconium & yttrium oxide ceramic element, 6-pin connector, wideband technology for precise air-fuel measurement. Ensures optimal fuel economy, reduced emissions, and 99% plug-and-play fitment with 12-month warranty.
