OEM 90369-T0003 Wheel Bearing Chrome Steel GCr15 (SAE52100) with 54x96x51mm Dimensions for Toyota Hilux Fortuner 2005-2016
| Material: | Chrome Steel GCr15 (SAE52100) | Width: | 51 Mm |
| Ring Hardness: | 60-65HRC | Outer Diameter: | 96 Mm |
| Inner Diameter: | 54 Mm | Bearing Type: | Deep Groove Ball Bearing |
| Static Load: | 7.85 KN | Dynamic Load: | 14 KN |
| High Light: | Chrome Steel GCr15 Wheel Bearing,54x96x51mm Dimensions Front Wheel Hub Bearing,OEM 90369-T0003 Bearing |
||
Front Wheel Hub Bearing 90369-T0003 90369T0003 for Toyota Hilux Vigo KUN25/KUN26 & Fortuner 2005-2016 — OEM Replacement 54x96x51mm
Front Wheel Hub Bearing (Inner) with OEM number 90369-T0003 (also listed as 90369T0003) is a verified direct-fit replacement for Toyota Hilux and Toyota Fortuner models produced between 2005-2016. This precision bearing is a critical component of the front axle hub assembly, responsible for supporting the vehicle's weight, enabling smooth wheel rotation with minimal friction, and maintaining proper wheel alignment for stable handling and braking performance.
- Real Shop Test Data: Precision-engineered bearing with 54mm inner diameter, 96mm outer diameter, 51mm width — verified against Toyota OEM specifications
- Proven Durability: Built with chrome steel GCr15 (SAE52100) with ring hardness 60-65HRC — rated for 200,000+ km under normal operation based on OEM-grade manufacturing standards
- Installation Success Rate: 99% direct bolt-on fitment — confirmed across thousands of repair orders for Hilux and Fortuner vehicles
- OEM Cross-Reference Verified: Replaces 43560-60010, 90080-37030, 43502-0K030, 54KWH01
If your front wheel bearing is failing, you may experience one or more of the following symptoms:
- Growling or Humming Noise: A rumbling sound from the front wheel area that changes with vehicle speed — typically worsens when turning
- Grinding Noise: Indicates more severe bearing damage and requires immediate attention
- Wheel Play or Vibration: Excessive play in the wheel or vibration felt through the steering wheel
- Uneven Tire Wear: Premature or uneven tire wear due to improper wheel alignment
- ABS Warning Light: Illumination of the ABS warning light (for vehicles with ABS — this bearing is without magnetic track/without ABS)
⚠️ A failing wheel bearing is a serious safety risk — prompt replacement is strongly recommended to prevent wheel separation or loss of vehicle control.
| Part Number: | 90369-T0003 90369T0003 | Product Name: | Wheel Bearing |
| Car Model: | Toyota Hilux Fortuner 2005-2016 | Engine Model: | Toyota |
| Condition: | 100% Brand New | Size: | Standard |
| Weight: | Standard | Origin: | China Mainland |
| Main Market: | Middle East, Asia, Africa, South America, North America & Europe | Package: | Neutral Packing Or Make It As Requested |
| Material: | High-strength aluminum alloy & precision bearings | Cooling Type: | Engine coolant circulation |
| Installation: | Direct OEM replacement | Quality Standard: | OEM equivalent / ISO quality control |
| Brand | Model | Chassis / Series | Engine | Years |
|---|---|---|---|---|
| Toyota | Hilux VII (Vigo) | KUN25, KUN26, KUN16 | 1KD-FTV (3.0L D-4D), 2KD-FTV (2.5L D-4D) | 2005-2015 |
| Toyota | Hilux VII (Vigo) | GGN25, GGN15 | 1GR-FE (4.0L V6) | 2005-2016 |
| Toyota | Hilux VII (Vigo) | TGN26, TGN36 | 2TR-FE (2.7L) | 2005-2016 |
| Toyota | Fortuner | GGN50, GGN60, KUN5#, KUN6#, LAN50, LAN5# | 1KD-FTV (3.0L D-4D), 2TR-FE (2.7L), 1GR-FE (4.0L V6) | 2005-2016 |
| Toyota | Land Cruiser Prado | GRJ120, KDJ120, GRJ125, GRN210, GRN215, GRN280 | 1GR-FE, 1KD-FTV, 2UZ-FE, 1KZ-TE | 2002-2015 |
| Toyota | 4Runner | -- | -- | Selected models |
| Engine Code | Displacement | Fuel Type | Application |
|---|---|---|---|
| 1KD-FTV | 3.0L (2982cc) | Diesel Turbo D-4D | Hilux Vigo, Fortuner |
| 2KD-FTV | 2.5L (2494cc) | Diesel Turbo D-4D | Hilux Vigo |
| 1GR-FE | 4.0L V6 | Petrol | Hilux GGN25, Fortuner GGN50/60 |
| 2TR-FE | 2.7L | Petrol | Hilux TGN26/36, Fortuner |
| 1KZ-TE | 3.0L | Diesel | Land Cruiser Prado |
| 2UZ-FE | 4.7L V8 | Petrol | Land Cruiser Prado |
- This bearing fits both Left and Right front wheel positions (interchangeable)
- This is a bearing without magnetic track — NOT compatible with ABS systems. For ABS-equipped vehicles, please verify your vehicle's specific bearing requirements
- Fits models with ATM (Automatic) and MTM (Manual) transmissions
- Please verify your vehicle's chassis code (KUN25/KUN26/GGN25/TGN26/etc.) and VIN before ordering
Guarantees factory-fit quality and performance — verified by Toyota OE part number 90369-T0003
Ensures perfect fitment in the front axle hub — verified by CMM dimensional inspection to Toyota OE specifications
Delivers exceptional wear resistance and durability — ring hardness tested to 60-65HRC for structural integrity under extreme loads
Provides superior load capacity for both radial and axial forces — verified against Toyota OEM specifications
Ready for immediate installation — reduces contamination risk and extends service life
Simplifies inventory management — one part number fits both sides
Guarantees zero wear, immediate response, and full service life — no rebuilding risk or core deposit required
Our manufacturing and inspection processes ensure every wheel bearing meets or exceeds Toyota OEM standards.
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify ID (54mm), OD (96mm), and width (51mm) match OE blueprint specifications |
| Material Hardness | Brinell hardness testing of chrome steel (GCr15) to verify 60-65HRC specification |
| Dynamic Load Testing | Load testing to verify Cr (14 KN) and Cor (7.85 KN) meet OEM specifications |
| Seal Integrity Test | 100% leakage test to guarantee pre-greased bearing remains contamination-free |
| Noise & Vibration Test | NVH laboratory testing to verify quiet operation (Z1V1 / Z2V2 / Z3V3 grade) |
| Durability Cycle Test | 500+ hour fatigue testing to verify 200,000+ km service life |
| Final Assembly Inspection | 100% visual and functional inspection before packaging |
⚠️ IMPORTANT: Professional Installation Highly Recommended
- Inspect the steering knuckle and hub mounting surface for damage or debris
- Verify the axle shaft splines are clean and undamaged
- This bearing is without magnetic track — confirm your vehicle does not require ABS sensor compatibility
Critical Warning: This is a press-fit bearing — professional hydraulic press equipment is required for proper installation. Improper installation can damage the bearing and lead to premature failure.
- Safely raise the front of the vehicle and support it on jack stands
- Remove the front wheel and brake caliper (support the caliper to avoid stressing the brake line)
- Remove the brake disc and axle hub
- Remove the old bearing from the steering knuckle using a hydraulic press
- Clean the bearing bore in the steering knuckle thoroughly
- CRITICAL: Press the new bearing into the steering knuckle using the correct press tools — apply pressure only to the outer race
- Install the hub into the bearing — apply pressure only to the inner race
- Reinstall the hub assembly, brake disc, and caliper
- Torque all fasteners to manufacturer's specified torque settings (refer to vehicle-specific workshop manual)
- Reinstall the wheel and torque lug nuts to specification
- Test drive to verify smooth operation and check for unusual noises
- Inspection: Every 50,000 km / 12 months. Listen for unusual noises, check for wheel play
- Replacement: Recommended at 200,000 km or immediately if failure symptoms appear
- Note: Always replace in pairs (both left and right sides) for even suspension and handling performance
- Packaging: Each wheel bearing is securely packed in a protective carton to prevent shipping damage
- Kit Contents: 1 bearing (left or right side). Gaskets may be included depending on supplier
- Suitable for: Wholesale distributors, auto parts retailers, 4×4 specialty shops, and repair shops
Toyota Idle Gear 13525-17010 1352517010 For Land Cruiser 70/80/100 & Coaster 1HZ 1HDT 1PZ — OEM Timing Gear
Toyota Idle Gear 13525-17010 1352517010 For Land Cruiser 70/80/100 & Coaster 1HZ 1HDT 1PZ — OEM Timing Gear Product Overview The Gear, Idle, No. 1 with Genuine Toyota OEM number 13525-17010 (also listed as 1352517010) is a verified direct-fit replacement for Toyota off-road and commercial vehicles ...
Steering Rack 45510-52341 45510-52340 For Toyota Vitz NSP135 4WD 2010-2013 — OEM RHD EPS Rack & Pinion
Steering Rack 45510-52341 45510-52340 For Toyota Vitz NSP135 4WD 2010-2013 — OEM RHD EPS Rack & Pinion Product Overview Electric Power Steering Rack Assembly with OEM numbers 45510-52341 (also listed as 45510-52340) is a verified direct-fit replacement for Toyota Vitz models from 2010 to 2013. ...
Rear Lower Control Arm 48710-42020 for Toyota RAV4 MK3 2006-2012 — OEM Alignment Camber / Toe Lateral Link
Rear Lower Control Arm 48710-42020 for Toyota RAV4 MK3 2006-2012 — OEM Alignment Camber / Toe Lateral Link Product Overview The Rear Lower Control Arm Assembly (ARM ASSY, REAR SUSPENSION, NO.1) with Genuine Toyota OEM number 48710-42020 (also listed as 4871042020) is a verified direct-fit replacemen...
Lower Control Arm 48606-39015 for Toyota Coaster HZB50 BB50 — OEM Front Left Suspension
Lower Control Arm 48606-39015 for Toyota Coaster HZB50 BB50 — OEM Front Left SuspensionProduct OverviewThe Front Lower Control Arm Assembly (ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH) with Genuine Toyota OEM number 48606-39015 (also listed as 4860639015) is a verified direct-fit replacement for ...
