Vehicle Speed Sensor 8-97328058-0 For ISUZU CXZ81 10PE1 Engine 8973280580 8971676190

Features & Advantages 

• OE Quality: Manufactured to strict ISUZU electronic and dimensional specifications for perfect fit and function.

• Precision Signal Output: Accurate speed detection ensures correct speedometer reading and transmission control.

• Durable Construction: Weather-sealed housing protects internal electronics from moisture, dirt, and vibration.

• Reliable Sensing Element: High-quality magnetic pickup or Hall-effect sensor provides consistent performance.

• Temperature Resistant: Engineered to withstand under-vehicle temperature extremes.

• Easy Installation: Direct replacement sensor with OE-spec connector for plug-and-play installation.

• Restores Speedometer Accuracy: Eliminates erratic or non-functional speedometer readings.

• Improves Shift Quality: Restores proper transmission shift timing for smooth operation.

• Enables Cruise Control: Restores cruise control functionality for driver comfort.

• Prevents Warning Lights: Resolves check engine or ABS warning lights caused by faulty speed signals.

• Long Service Life: Engineered for reliable performance in demanding commercial applications. 

  

Vehicle & Engine Compatibility

This vehicle speed sensor is specifically designed for ISUZU heavy-duty trucks. Common applications include:

• ISUZU CXZ81 — Heavy-Duty Trucks

• ISUZU CXZ — Various heavy-duty models

• ISUZU EX / GX Series — Heavy-Duty Trucks

ISUZU 10PE1 Engine Specifications:

• 10-Cylinder, V-Type Naturally Aspirated Diesel

• Displacement: 14.3L (14253cc)

• Valvetrain: OHV

• Widely used in CXZ series heavy-duty trucks

Transmission Applications:

• Manual transmissions with electronic speed sensor provision

• Various ISUZU heavy-duty transmission models

Installation Notes

Professional installation recommended. Proper electrical connection is essential:

1. Disconnect battery — Disconnect the negative battery cable before beginning work.

2. Locate the speed sensor — Identify the vehicle speed sensor on the transmission or transfer case.

3. Clean the sensor area — Clean around the sensor to prevent contamination during removal.

4. Disconnect the electrical connector — Carefully unplug the wiring harness connector from the sensor.

5. Remove the old sensor — Unscrew the sensor using the appropriate wrench or socket.

6. Inspect the mounting hole — Check the mounting bore for debris, damage, or metal shavings.

7. Clean the mounting area — Clean the mounting surface and threads thoroughly.

8. Prepare the new sensor — Inspect the new sensor and ensure the O-ring/seal is in place and undamaged.

9. Apply anti-seize (optional) — Apply a small amount of anti-seize compound to the threads if recommended.

10. Install the new sensor — Thread the sensor into the mounting hole and tighten to manufacturer specification.

11. Connect the electrical connector — Plug the wiring harness into the sensor until it clicks securely.

12. Reconnect battery — Reconnect the negative battery cable.

13. Clear error codes — Use a diagnostic tool to clear any fault codes related to the speed sensor.

14. Test drive — Test drive the vehicle to verify accurate speedometer reading and proper transmission operation.

15. Re-check for leaks — If the sensor seals transmission fluid, check for leaks after the test drive.

Quality Control

Packaging and Delivery

Inquiry