Rear Brake Wheel Cylinder with Precision-Honed Hydraulic Cylinder and High-Quality Brake Fluid-Resistant Seals for Direct OEM Replacement

Precision-engineered rear brake wheel cylinder converts hydraulic pressure into mechanical force, actuating brake shoes for reliable stopping power in ISUZU NKR and NPR trucks with 4BD1 diesel engines.

• OE Quality: Manufactured to strict ISUZU dimensional and performance specifications for perfect fit and function
• Precision Honed Bore: Ensures smooth piston travel and consistent hydraulic pressure
• Durable Construction: High-quality cast iron/aluminum housing resists corrosion and wear
• Reliable Seals: Brake fluid-resistant seals prevent leaks and maintain hydraulic pressure
• Restores Braking Performance: Eliminates reduced stopping power, brake pull, and drag caused by faulty cylinders
• Ensures Balanced Braking: Proper wheel cylinder function maintains even brake force distribution
• Direct Replacement: Simple installation during brake system service
• Long Service Life: Engineered for reliability in demanding commercial applications
• Critical Safety Component: Essential for safe vehicle operation
• Cost-Effective Maintenance: Prevents expensive brake system repairs and ensures compliance with safety regulations

This rear brake wheel cylinder is specifically designed for ISUZU light to medium-duty trucks.

• ISUZU NKR - Light to Medium-Duty Trucks
• ISUZU NPR - Medium-Duty Trucks
• ISUZU ELF (select models with 4BD1 engine)
• ISUZU NHR (select models with compatible brake systems)

• 4-Cylinder, Inline Diesel
• Displacement: 3.9L (3856cc)
• Naturally Aspirated / Turbocharged (4BD1T)
• Valvetrain: OHV
• Widely used in NKR and NPR series trucks

• Rear drum brake system
• Compatible with standard ISUZU hydraulic brake configurations

Professional installation required. Brake system safety is critical:

1. Raise and secure the vehicle - Safely lift the rear axle and support on jack stands
2. Remove the rear wheels - Remove the rear wheels for access to the brake assembly
3. Remove the brake drum - Carefully remove the rear brake drum
4. Inspect brake shoes and drums - Check brake shoes and drums for wear or damage; replace if necessary
5. Disconnect brake line - Carefully disconnect the brake fluid line from the wheel cylinder
6. Remove the old wheel cylinder - Unbolt and remove the old wheel cylinder from the backing plate
7. Clean the backing plate - Clean the backing plate mounting surface and surrounding area
8. Prepare the new wheel cylinder - Inspect the new cylinder and verify it matches the original
9. Install the new wheel cylinder - Position the new cylinder and secure with mounting bolts
10. Reconnect brake line - Reconnect the brake fluid line to the new wheel cylinder
11. Reinstall brake shoes and drum - Reinstall the brake shoes and drum assembly
12. Reinstall the wheel - Reinstall the rear wheel
13. Bleed the brake system - Bleed the brake system to remove all air from the lines
14. Check brake fluid level - Check and top up brake fluid in the master cylinder reservoir
15. Check pedal feel - Test the brake pedal for proper feel and travel
16. Test operation - Test drive the vehicle at low speed to verify proper braking performance
17. Check for leaks - Inspect the wheel cylinder and all connections for fluid leakage
18. Re-torque wheel nuts - Re-torque wheel nuts after the test drive

• Material Verification: Confirms housing and seal materials meet OE specifications
• Dimensional Inspection: Bore size, mounting dimensions, and port positions verified against OEM tolerances
• Leakage Testing: 100% pressure-tested for internal and external fluid leakage
• Piston and Seal Inspection: Seal integrity and piston smoothness verified for reliable operation
• Surface Finish Inspection: Machined surfaces checked for proper finish
• Visual Inspection: 100% checked for casting defects, machining flaws, or damage
• Packaged Safely: Protected and securely packaged to prevent contamination and damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Rear Brake Wheel Cylinder 8-97078619-0 For ISUZU NKR NPR 4BD1 8971793500, please contact our sales team for a competitive quote and expert technical support.