Fuel Injector 06H906036P with 6-Hole Nozzle Design 280cc/min Flow Rate and Corrosion-resistant Composite Material for Audi VW 2.0T TSI
| Nozzle Design: | 6-Hole | Flow Rate: | 280cc/min @ 3.0 Bar |
| Material: | Corrosion-resistant Composite Material With High-temp Viton O-rings | Engine Compatibility: | 2.0T TSI / TFSI (EA888 Gen1/Gen2) |
| Fuel Type: | Petrol / Gasoline | Quantity Required: | 4 Per Vehicle |
| High Light: | 6-Hole Nozzle Design Fuel Injector,280cc/min Flow Rate Fuel Injector,Corrosion-resistant composite material Fuel Injector |
||
The Fuel Injector 06H906036P is a verified direct-fit replacement for Audi and Volkswagen vehicles equipped with 2.0T TSI/TFSI engines. Manufactured to OEM specifications (part number 0261500076, HDEV-5 type), this high-pressure direct injection (GDI) injector delivers precisely metered, atomized fuel directly into the combustion chamber.
- Check Engine Light flashing with diagnostic trouble codes (P0171, P0300-P0304)
- Poor engine performance and rough acceleration
- Rough idle with noticeable vibrations
- Engine misfires and stalling
- Increased fuel consumption
- Hard starting with extended cranking time
- Fuel leaks or rich running conditions
| Model | Generation / Chassis | Engine | Years |
|---|---|---|---|
| A3 / A3 Quattro | 8P | 2.0T TFSI | 2008-2013 |
| A4 / A4 Quattro | B8 (8K2) | 2.0T TFSI | 2009-2016 |
| A5 / A5 Quattro | B8 (8T) | 2.0T TFSI | 2010-2016 |
| A6 / A6 Quattro | C7 | 2.0T TFSI | 2012-2014 |
| Q3 | 8U | 2.0T TFSI | 2015-2018 |
| Q5 | 8R | 2.0T TFSI | 2011-2016 |
| TT / TT Quattro | Mk2 (8J) | 2.0T TFSI | 2008-2014 |
| Model | Generation | Engine | Years |
|---|---|---|---|
| Beetle | -- | 2.0T TSI | 2010-2017 |
| CC | -- | 2.0T TSI | 2012-2016 |
| Eos | -- | 2.0T TSI | 2009-2016 |
| Golf / GTI | Mk5 / Mk6 | 2.0T TSI | 2010-2014 |
| Jetta / GLI | Mk5 / Mk6 | 2.0T TSI | 2008-2014 |
| Passat | B6 / B7 | 2.0T TSI | 2008-2010 |
| Tiguan | 1 | 2.0T TSI | 2009-2016 |
| Feature | Benefit |
|---|---|
| OEM Specification (0261500076) | Guarantees factory-fit quality and performance |
| 6-Hole Nozzle Design | Superior fuel atomization for complete combustion |
| 280cc/min Flow Rate @ 3.0 Bar | Precise fuel metering within 2% tolerance |
| Corrosion-Resistant Materials | Long-term durability and fuel degradation resistance |
| High-Temperature Viton O-Rings | Prevents fuel leakage under extreme conditions |
| Direct Plug-and-Play Fitment | No modifications required |
| 100% New - No Core Charge | Zero wear and full service life guarantee |
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to match OE blueprint specifications |
| Flow Rate Calibration | Dynamic flow-bench testing within 2% tolerance |
| Spray Pattern Test | High-speed imaging for optimal atomization |
| Leakage Test | 100% high-pressure leak test |
| Solenoid Response Test | Electrical response time verification |
| Durability Cycle Test | 500+ hour fatigue testing |
| Final Assembly Inspection | 100% visual and functional inspection |
Pre-Installation Checklist:
- Depressurize the fuel system
- Disconnect negative battery terminal
- Inspect fuel injector mounting clips
- Consider purchasing Fuel Injector Reseal Kit (06J998907B)
- Replace all 4 injectors simultaneously for optimal performance
Maintenance Schedule:
- Inspection: Every 50,000 km / 12 months
- Replacement: Recommended immediately if experiencing failure symptoms
- Replace all 4 injectors as a set when servicing
Each injector is securely packed in protective cartons to prevent shipping damage. Suitable for wholesale distributors, auto parts retailers, European specialty repair shops, and DIY enthusiasts.
OEM Specification Water Pump Thermostat Assembly for EA888 Gen3 Engines with 113 °C Thermostat Opening Temperature
OEM-grade water pump/thermostat assembly 06K121111J for EA888 Gen3 engines. Features 113°C thermostat, includes union connector & O-rings. Direct plug-and-play fitment with 99% success rate. Manufactured by INA/Pierburg to VAG specifications. 12-month warranty, 100% new condition.
OEM Specification Oil Separator PCV Valve for EA888 Gen3 Engine with 24-Month Warranty
OEM Oil Separator 06K103495AG for Audi, VW, Skoda, Seat EA888 Gen3 1.8/2.0T engines. Direct plug-and-play replacement with included gasket, 99% fitment success. High-quality materials withstand heat and oil exposure. Restores emission control, reduces oil consumption. Backed by 24-month warranty.
Genuine OEM Mass Air Flow Sensor with Hot-Film Technology for 2.0L TSI/TFSI Engines
Genuine VW OEM Mass Air Flow Sensor 06J-906-461-B for 2.0L TSI/TFSI engines. Hot-film technology ensures precise air measurement, optimal fuel efficiency, and 160,000+ km durability. Direct plug-and-play fitment for VW, Audi, SEAT, Škoda vehicles with 12-month warranty.
Oxygen Sensor Lambda Sensor with Zirconium & Yttrium Oxide Ceramic Element 6-Pin Connector and Wideband Heated Planar for Audi A3 VW Passat 2.0T
OEM-grade front oxygen sensor 06J906262AA for Audi/VW 2.0T TSI engines. Features zirconium & yttrium oxide ceramic element, 6-pin connector, wideband technology for precise air-fuel measurement. Ensures optimal fuel economy, reduced emissions, and 99% plug-and-play fitment with 12-month warranty.
