OEM Replacement Turbocharger Oil Feed Pipe 06H121497D Direct Fit for EA888 Gen 2 & Gen 3 Engines
| Weight: | Approx. 0.05 Kg | Engine Compatibility: | Audi 2.0 TFSI / TSI (EA888 Gen 2 & Gen 3) |
| OEM Part Numbers: | 06H121497D (also L06H121497D) | Material: | High-strength Aluminum Alloy & Precision Bearings |
| Cooling Type: | Engine Coolant Circulation | Installation: | Direct OEM Replacement |
| Quality Standard: | OEM Equivalent / ISO Quality Control | Engine Model: | EA888 |
| High Light: | OEM turbocharger oil feed pipe,EA888 Gen 2 turbocharger pipe,AUDI turbocharger replacement part |
||
The Turbocharger Oil Feed Pipe with OEM reference number 06H121497D is a verified direct-fit replacement for a wide range of Audi and Volkswagen Group vehicles equipped with the 2.0 TFSI / TSI engine (EA888 Gen 2 and Gen 3). This critical component delivers engine oil to the turbocharger to lubricate and cool its rotating assembly.
| Part Number: | 06H121497D | Product Name: | Turbocharger Oil Feed Pipe |
|---|---|---|---|
| Car Model: | Audi A4 B9 | Engine Model: | EA888 |
| Condition: | 100% Brand New | Size: | Standard |
| Material: | High-strength aluminum alloy & precision bearings | Cooling Type: | Engine coolant circulation |
Primary Applications:
| Brand | Model | Chassis / Series | Engine | Years |
|---|---|---|---|---|
| Audi | A4 / A4 Allroad | B8 (8K), B9 (8W) | 2.0 TFSI | 2009-2016 (B8) |
| Audi | A5 / A5 Sportback | B8 (8T), F5 | 2.0 TFSI | 2009-2016 |
| Audi | A6 / A6 Avant | C7 (4G) | 2.0 TFSI | 2012-2018 |
| Audi | Q5 | 8R, FY | 2.0 TFSI | 2009-2017 |
| Volkswagen | Amarok | 2H | 2.0 TSI | 2010-2022 |
Engine Compatibility:
- 2.0 TFSI (160-252 hp / 118-185 kW)
- 2.0 TFSI quattro, 2.0 TFSI flexible fuel, 2.0 TFSI Hybrid
| Symptom | Description |
|---|---|
| Turbocharger whine or noise | Lack of adequate lubrication causes bearing wear |
| Reduced engine performance | Turbocharger not receiving sufficient oil flow |
| Oil leaks | Visible oil around the turbocharger or oil feed line |
| Check Engine Light | Turbocharger-related fault codes |
| Smoke from exhaust | Oil burning in the turbocharger due to internal leaks |
- Turbocharger failure due to oil starvation
- Expensive turbocharger replacement
- Engine damage from oil leaks
Manufactured to original equipment standards — ensures perfect fit and reliable oil flow
No modifications required — matches factory routing and connections precisely
Prevents oil starvation — extends turbocharger life and prevents premature failure
Larger and better protected than the original design, which tends to become restricted over time
Matches multiple OEM numbers (06H121497D, 06H121497B) — simplifies sourcing
Fits Audi A4, A5, A6, Q5, A8, VW Amarok, Seat Exeo — versatile for workshops and distributors
| QC Item | Verification Method |
|---|---|
| Dimensional accuracy | Precision inspection against OE blueprint — ensures proper fit on EA888 engine and turbocharger |
| Material quality | High-quality materials verification — oil and heat resistance |
| Connection integrity | Fittings and connectors verified — ensures leak-free installation |
| Batch traceability | Each production batch documented with quality certificates |
Installation Guidelines (Reference Audi workshop manual for complete steps):
- Safety first — allow engine to cool completely before starting work
- Disconnect battery negative terminal
- Remove the turbocharger upper cover
- Remove the old oil feed pipe from the turbocharger
- Compare the new pipe with the old unit — verify part number (06H121497D) matches
- Inspect all connections and fittings for damage
- Install the new oil feed pipe with new sealing washers and bolts (recommended)
- Torque all bolts to manufacturer specification
- Fill the turbocharger with engine oil before start-up — critical to prevent dry start damage
- Start engine and check for oil leaks
Maintenance Schedule:
- Inspect the turbocharger oil feed pipe for leaks or damage during every service
- If the pipe has failed, inspect the turbocharger for damage
- Always replace the oil feed pipe when replacing the turbocharger
- Individually sealed in protective packaging
- Packed in branded or plain carton
- Bulk wholesale available in master cartons
- Suitable for: Audi/VW specialist repair shops, independent garages, auto parts distributors
OEM Specification Multi-Layer Steel (MLS) Cylinder Head Gasket for EA888 Gen3 Engine Compatibility
OEM MLS cylinder head gasket 06K103383K for Audi/VW EA888 Gen3 1.8/2.0T engines. Features multi-layer steel construction, 160,000+ km durability, 99% fitment rate, and 12-month warranty. Direct replacement for vehicles from 12/03/2013 onward.
OEM 06H906283B Vapor Canister Purge Solenoid with Direct Plug-and-Play Fitment and Electric Solenoid Valve for Audi EVAP System
OEM Vapor Canister Purge Solenoid 06H906283B for Audi Q3/S6/allroad. Direct plug-and-play replacement with 99% installation success rate. Electric solenoid valve ensures precise EVAP system control, reducing emissions and improving fuel efficiency. 100% new condition with 12-month warranty.
Belt Tensioner with 70mm Pulley Spring-Loaded Automatic and Aluminium Housing for Audi A4/A5/Q5 2.0T
OEM replacement belt tensioner 06H-903-133-G for Audi A4/A5/Q5 2.0T. Features spring-loaded automatic design, 70mm pulley, aluminium housing, and direct bolt-on fitment. Verified 99% installation success rate and 160,000+ km durability.
OEM-grade Engine Coolant Hose for Audi 2.0T EA888 Gen 2 Turbocharger Coolant Return Line Direct-fit Replacement
Engine Coolant Hose 06H121492E for 2009-2017 Audi 2.0T — Turbocharger Coolant Return LineProduct OverviewThe Engine Coolant Hose with OEM reference number 06H121492E is a verified direct-fit replacement for a wide range of Audi vehicles equipped with the 2.0T turbocharged 4-cylinder engine (EA888 ...
