5-Hole Vented Front Brake Disc OEM MB334308 for Mitsubishi Fuso Canter — Direct Fit Brake Rotor
| Minimum Thickness: | 22 Mm | Center Hole Diameter: | 110.1 Mm |
| Disc Type: | Vented | Disc Thickness: | 24 Mm |
| Outer Diameter: | 287.9 Mm | Overall Height: | 55.9 Mm |
| Bolt Circle Diameter: | 136 Mm | Number of Holes: | 5 |
| High Light: | 5-hole vented front brake disc,OEM MB334308 brake rotor,Mitsubishi Fuso Canter brake disc |
||
The Front Brake Disc (Rotor) with OEM reference number MB334308 is a verified direct-fit replacement for Mitsubishi Fuso Canter light-duty trucks equipped with 4M40, 4D33, and 4D34 engines. This critical braking component mounts to the wheel hub and works with brake pads to slow and stop the vehicle.
Manufactured to meet or exceed original equipment standards, this disc features a vented design for superior heat dissipation and is produced from grey cast iron FC250 (G3000 equivalent) for reliable and safe braking performance.
| Part Number | MB334308 | Product Name | Front Brake Disc |
|---|---|---|---|
| Car Model | Mitsubishi Fuso Canter | Engine Model | 4M40 |
| Condition | 100% Brand New | Origin | China Mainland |
| Main Markets | Middle East, Asia, Africa, South America, North America & Europe | ||
| Brand | Model | Engine | Years |
|---|---|---|---|
| Mitsubishi Fuso | Canter | 4M40 2.8L | 1998- |
| Mitsubishi Fuso | Canter | 4D33 / 4D34 3.9L | 1993-2004 |
| Mitsubishi Fuso | Canter | 4.2L | 1993-2004 |
| Mitsubishi Fuso | Rosa | 5.2L | 1999- |
- Mitsubishi 4M40 (2.8L, 4-cylinder, diesel)
- Mitsubishi 4D33 / 4D34 (3.9L, 4-cylinder, diesel)
| Symptom | Description |
|---|---|
| Vibration or pulsation | Steering wheel or brake pedal pulsates when braking |
| Squealing or grinding | Unusual noises during braking |
| Reduced braking performance | Longer stopping distances |
| Uneven pad wear | Brake pads wearing unevenly |
| Visible damage | Scoring, cracks, or warping on the disc surface |
- Increased stopping distances and potential accidents
- Damage to brake calipers and pads
- Warped brake discs causing persistent vibration
| QC Item | Verification Method |
|---|---|
| Dimensional accuracy | Precision measurement — outer diameter (287.9mm), thickness (24mm), center hole (110.1mm), height (55.9mm), PCD (136mm), 5-hole pattern |
| Material composition | FC250 / G3000 grey cast iron verification — ensures proper wear resistance and heat dissipation |
| Runout / Balance | Precision measurement — ensures smooth braking without vibration |
| Surface finish | Visual and dimensional inspection — ensures proper pad contact |
| Internal defects | Inspection for cracks, porosity, or surface imperfections |
| ISO/TS certification | Manufacturing facility certified to international quality standards |
| Batch traceability | Each production batch documented with quality certificates |
Installation Guidelines (Reference Mitsubishi Fuso workshop manual for complete steps):
- Safety first — securely support the vehicle on jack stands
- Remove the front wheel
- Remove the brake caliper and caliper bracket — support the caliper to avoid stressing the brake hose
- Remove the brake disc retaining screws (if equipped)
- Remove the old brake disc from the hub
- Clean the hub mounting surface thoroughly — remove all rust and debris
- Compare the new disc with the old unit — verify part number (MB334308) and dimensions (287.9mm diameter, 24mm thickness) match
- Install the new brake disc onto the hub
- Install the brake disc retaining screws (if applicable)
- Reinstall the caliper bracket and caliper
- Torque all bolts to manufacturer specification
- Reinstall the wheel and torque lug nuts to specification
- Bed in the new brake discs — follow manufacturer procedure for proper break-in
- Road test — verify smooth braking without vibration or noise
Maintenance Schedule:
- Inspect brake discs for wear, scoring, or damage during every brake service
- Replace brake discs when they reach minimum thickness (22mm)
- Replace brake discs in pairs (both front discs) for balanced braking performance
- Always replace brake pads when replacing brake discs
- Individually sealed in protective packaging
- Packed in polybag, white/color box, or on pallets
- Sold individually (1 disc per unit)
- Bulk wholesale available in master cartons
- Stock availability: Ready to ship
- Country of Origin: Made in China
- Suitable for: Mitsubishi Fuso specialist repair shops, commercial vehicle maintenance depots, fleet maintenance suppliers, auto parts distributors
24V DC Hall-Effect Speed Sensor Direct OEM Replacement for Mitsubishi Hino Truck Odometer Sensor
Speed Sensor S8319-01511 for Mitsubishi/Hino trucks. 24V Hall-effect sensor with 8P/R or 25P/R pulse options. Direct OEM replacement for Hino 700/500 Series and Mitsubishi Fuso trucks. Durable construction ensures accurate speedometer/odometer readings.
24V DC Speed Sensor with Stainless Steel Body and Hall-Effect Technology for Mitsubishi Canter Fuso
Speed Sensor MK421137: Direct OEM replacement for Mitsubishi Canter/Fuso trucks. Features Hall-effect technology, stainless steel construction, waterproof connectors, and 24V compatibility. Ensures accurate speedometer/odometer readings and ECU input signals.
High-Efficiency Filtration Fuel Water Separator OEM Standard for Mitsubishi Fuso Trucks 8DC91 6D22T 6D16T
Fuel Water Separator ME039811 offers high-efficiency contaminant removal & water separation for Mitsubishi Fuso trucks (FV515, FK415, FM515, FM557) with 8DC91, 6D22T, 6D16T engines. Direct OEM replacement with 99.9% filtration accuracy, durable construction, and reliable sealing protects injection systems.
Durable Metal Housing Hand Fuel Pump with Reciprocating Piston Type for OEM Standard Mitsubishi Trucks
Hand Fuel Pump HD-I012/HDI012 is a manual primer pump for Mitsubishi trucks. Features durable metal construction, reciprocating piston design for efficient priming, and direct OEM replacement fit. Ensures reliable engine starting by removing air from fuel systems.
