600mm Diameter 8-Blade Cooling Fan Blade for Hino 500 H07CT Engine Made of 45# Steel / 40Cr Alloy Steel

Premium-quality engine cooling fan blade designed specifically for Hino 500 series trucks with H07CT diesel engines. This direct replacement component ensures reliable cooling performance and prevents engine overheating under heavy loads.

• OE Quality: Manufactured to Hino dimensional and material specifications for perfect fit and reliable cooling
• Precision Balanced: Dynamically balanced to minimize vibration and noise
• Heavy-Duty Material: Constructed from 45# steel or 40Cr alloy steel - resists cracking, warping, and fatigue
• 8-Blade Design: Optimized configuration for maximum airflow with minimal power draw
• 600mm Diameter: Provides adequate cooling capacity for H07CT diesel engines
• ISO/TS16949 Certified: Manufactured under strict quality management systems
• Direct Replacement: Matches factory bolt pattern (108mm ID) and rotation direction

Hino Truck Models:

• Hino 500 Series (medium-duty trucks)
• Hino Ranger (select models - verify)

Engine Application:

• Hino H07CT (diesel engine)

1. Disconnect battery negative cable
2. Remove the fan shroud (if equipped) for access
3. Use a holding tool to prevent rotation if fan is mounted to a fan clutch
4. Remove mounting bolts securing the fan to the clutch or water pump hub
5. Remove old fan and inspect fan clutch for leaks or play
6. Compare new fan with old - verify diameter, bolt pattern, and orientation
7. Install new fan onto clutch/hub, ensuring bolt holes align
8. Hand-start all bolts, then torque to specification (10-15 Nm for M8, 20-25 Nm for M10)
9. Reinstall fan shroud
10. Reconnect battery, start engine, and check for vibration or unusual noise

• Material Verification: Steel composition and tensile strength tested
• Dimensional Inspection: Overall diameter, inner diameter, blade pitch, and mounting hole pattern verified
• Dynamic Balance Test: Each fan spun at operating speed to ensure imbalance within tolerance
• Heat Aging Test: Samples exposed to high temperatures to check for warping or cracking
• Visual Inspection: 100% checked for molding defects, cracks, or surface imperfections
• ISO/TS16949 Certified: Manufacturing processes meet international automotive quality standards

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea