OEM Aluminum Core Radiator for Toyota Corolla 2009-2013 — Cross-Flow Cooling Assembly

The Radiator Assembly with OEM reference number 16410-22180 is a verified direct-fit replacement for the Toyota Corolla (E150 generation) manufactured between 2009 and 2013. This radiator is a critical component of the engine cooling system, responsible for dissipating heat from the engine coolant to maintain optimal operating temperatures.

The radiator works by circulating coolant through a series of tubes and fins, where airflow—from both vehicle motion and the cooling fan—removes excess heat before the coolant returns to the engine. A failing or clogged radiator can lead to engine overheating, reduced performance, and potentially severe engine damage. This OE-spec replacement radiator restores proper cooling system function and protects your engine.

Manufactured to meet or exceed original equipment standards, this radiator features durable aluminum construction with plastic end tanks, delivering reliable heat dissipation and long service life under demanding operating conditions.

Additional Fitment Notes:

• Compatible with both Manual Transmission (MT) and Automatic Transmission (AT) variants
• Fits vehicles with and without air conditioning
• For 2009-2013 model years specifically

Installation Guidelines (Reference Toyota workshop manual for complete steps):

1. Safety first—allow engine to cool completely before starting work
2. Drain the cooling system—capture coolant for proper disposal
3. Remove the cooling fan assembly and fan shroud
4. Disconnect upper and lower radiator hoses
5. Disconnect transmission cooler lines (if equipped with automatic transmission)
6. Remove the radiator mounting bolts and brackets
7. Carefully remove the old radiator from the vehicle
8. Compare the new radiator with the old unit—verify core dimensions, hose connection positions, and mounting points match
9. Install the new radiator into position
10. Reconnect all hoses, lines, and electrical connections
11. Torque mounting bolts to manufacturer specification
12. Refill cooling system with the correct Toyota-approved coolant (50/50 mixture)
13. Bleed the cooling system to remove air pockets—critical for proper cooling
14. Start engine, bring to operating temperature, and check for leaks
15. Verify heater operation and proper temperature gauge reading

Maintenance Schedule:

• Inspect radiator and hoses for leaks or damage during every service
• Flush and replace coolant every 2 years or 40,000 km (or per manufacturer recommendation)
• Clean radiator fins of debris (bugs, dirt, leaves) annually or as needed
• Replace radiator cap if it shows signs of wear or fails to hold pressure

• Individually sealed in protective packaging
• Packed with EPE mats, bubble bags, and vacuum packaging for protection during transit
• Bulk wholesale available in master cartons
• Suitable for: Toyota specialist repair shops, independent garages, auto parts distributors

Supply Details: