High-strength forged steel front upper control arm with integrated precision ball joint and durable rubber bushings for Toyota Hiace H200

The front upper control arm (left-hand side) with OEM number 48067-29235 is a direct factory-spec replacement for the front suspension system of the Toyota Hiace H200 series (5th generation). This critical component connects the front wheel hub or steering knuckle to the vehicle chassis, guiding wheel movement through suspension travel and maintaining proper alignment geometry.

The H200 series Hiace utilizes a double wishbone, torsion bar front suspension design, which employs upper and lower control arms to locate and guide the front wheels. The upper control arm works in conjunction with torsion bars to set ride height and maintain vehicle level under load.

This Toyota Hiace upper control arm LH 48067-29235 directly replaces the factory component on the following configurations:

Model Year Range: Approximately 2005 - 2019 (varies by market and chassis code)

• Direct OEM Replacement - Carries exact Toyota part number 48067-29235 and manufactured to original equipment specifications
• Double Wishbone Suspension Compatibility - Engineered specifically for H200 series double wishbone, torsion bar front suspension design
• High-Strength Forged Steel Construction - Provides durability for demanding commercial vehicle operation conditions
• Durable Rubber Bushings - Absorb road shocks and isolate chassis from suspension vibration
• Integrated Precision Ball Joint - Provides articulation between control arm and steering knuckle
• Restores Alignment and Handling - Returns proper wheel alignment, stable handling, and extends tyre life
• Prevents Secondary Suspension Damage - Avoids cascading damage to tyres and other suspension components
• Comprehensive Vehicle Coverage - Single SKU serves multiple Hiace H200 variants across diesel and petrol models

Each batch undergoes comprehensive verification at the OE supplier level:

A certificate of conformance (COC) with batch test data is available for wholesale orders upon request.

• This is the left-hand (LH) upper control arm. For the right-hand side, order 48066-29235
• Inspect the ball joint on the new arm before installation - ensure the boot is intact and the joint moves smoothly
• Replace the control arm bolts with new ones if specified in the Toyota workshop manual
• Torque all bolts to Toyota factory specification using a torque wrench
• Do not tighten the bushing bolts with the suspension at full droop - the vehicle must be at normal ride height when final torque is applied to prevent bushing preload
• A wheel alignment is required after control arm replacement - the front toe, camber, and caster must be reset to factory specifications
• Replace in pairs if wear is even - while the arms can be replaced individually, it is recommended to replace both upper control arms at the same time if the vehicle has high mileage

• Individual packaging: Sealed in anti-rust VCI bag, foam-lined carton
• Carton dimensions: Approximately 60 × 30 × 30 cm
• Gross weight: Approximately 5.80 kg per unit
• Master carton: 10 units per export carton (palletisable)
• Lead time: 3-7 working days for stock orders; 15-25 days for production orders
• Minimum order quantity: 1 piece (sample order available)
• Shipping methods: FedEx, UPS, DHL for sample quantities; sea freight (LCL/FCL) from Shanghai, Ningbo, Guangzhou ports
• H/S Code: 8708.80