Belt-driven Water Pump Assembly with Mechanical Seal for Isuzu 6HE1-T FSR FTR - Direct Replacement
Key Attributes
Product Summary
Water Pump Assembly 8-97602781-0 for Isuzu 6HE1-T FSR FTR. Direct OEM replacement with precision impeller, heavy-duty bearing, and mechanical seal. Includes gasket for leak-free installation. Restores cooling performance and prevents overheating.
Product Details
Belt-driven water pump for Isuzu 6HE1-T
,Mechanical seal water pump assembly
,Direct replacement Isuzu FSR FTR pump
| Part Number | 8-97602781-0, 8976027810 |
| Product Name | Water Pump Assembly / Engine Water Pump |
| Car Model | ISUZU FSR, FTR |
| Engine Model | ISUZU 6HE1-T (6.5L Turbo Diesel) |
| Condition | 100% Brand New |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Warranty | 6 Months |
- OE Quality: Manufactured to Isuzu dimensional and material specifiions for perfect fit and reliable cooling
- Precision Impeller: Cast or stamped impeller designed for maximum coolant flow at all engine speeds
- Heavy-Duty Bearing: Sealed ball bearing with high-temperature grease for long life under heavy loads
- Mechanical Seal: Ceramic or carbon face seal prevents coolant leakage and resists wear
- Corrosion-Resistant Housing: Cast iron or aluminum housing treated to resist rust and electrolysis
- Includes Gasket: Factory-matched gasket for leak-free installation
- Dynamically Balanced: Ensures smooth, quiet operation without vibration
- Direct Replacement: Matches OE mounting holes, inlet/outlet positions, and pulley fitment
- Cost-Effective: Affordable alternative to genuine OEM without compromising reliability
- ISUZU FSR (medium-duty truck, 6HE1-T engine)
- ISUZU FTR (medium-duty truck, 6HE1-T engine)
- May also fit other Isuzu models with 6HE1-T engine - verify
- 6-Cylinder, Inline Diesel, Turbocharged
- Displacement: 6.5L (6549cc)
- Appliion: FSR, FTR, and other medium-duty trucks
- Drain coolant - from radiator and engine block
- Remove drive belt - loosen tensioner or idler pulley
- Remove fan and fan clutch (if applicable) - unbolt from water pump flange
- Disconnect hoses - note positions (inlet, outlet, bypass)
- Unbolt old water pump - remove mounting bolts. Note bolt lengths and positions
- Clean mating surface - on engine block. Remove old gasket material. Do not scratch surface
- Compare new pump with old - check mounting, port loions, and pulley fit
- Install new gasket - position on block (some gaskets have adhesive backing)
- Install new water pump - place onto studs/bolts. Tighten bolts in sequence to specifiion (typically 20-30 Nm). Do not overtighten
- Reconnect hoses - use new hose clamps if needed
- Reinstall fan and fan clutch - torque bolts to specifiion
- Reinstall drive belt - ensure correct routing and tension
- Refill coolant - use recommended type (e.g., long-life or heavy-duty diesel coolant). Fill slowly to avoid air pockets
- Bleed the cooling system - run engine with heater on high, add coolant as needed. Use bleed valve if equipped
- Check for leaks - inspect pump gasket and hose connections
- Test drive - monitor engine temperature gauge
- Material Verifiion: Housing material and seal composition tested
- Dimensional Inspection: Mounting flange, shaft diameter, inlet/outlet sizes verified against OE blueprints
- Leak Test (Pressure/Vacuum): Each pump tested for seal integrity (no coolant bypass)
- Bearing Noise Test: Rotated to check for smooth, quiet operation
- Impeller Balance: Dynamic balance checked to minimize vibration
- Visual Inspection: 100% checked for casting defects, cracks, or damage
- Packaged Safely: Pump sealed in plastic bag, boxed with foam protection. Gasket included in separate compartment
- Neutral export packing or customized packaging available
- Carton or wooden case for safe transportation
- Fast delivery for stock items
- Shipping by Express Air or Sea