Front Engine Mount Rubber for ISUZU 4JJ1-T 3.0L Turbo Diesel with Vibration Damping and Natural Rubber/SBR Bonded to Steel

Name: Front Engine Mount Rubber for ISUZU 4JJ1-T 3.0L Turbo Diesel with Vibration Damping and Natural Rubber/SBR Bonded to Steel
Brand: Yimi (Guangzhou) Automotive Parts Co, Ltd
SKU: ISUZU TFS85
Availability: InStock

Basic Properties

Place of Origin: China

Brand Name: YIMI

Certification: ISO/TS16949

Model Number: ISUZU TFS85

Trading Properties

Minimum Order Quantity: 10 pcs

Price: Negotiable

Payment Terms: T/T,

Supply Ability: 10000 pcs/month

Isuzu DMAX clutch slave cylinder

4x4 clutch slave cylinder

Isuzu clutch parts with warranty

Specifications

Part Name:	RUBBER; ENG FOOT, FRT	Material:	Natural Rubber / SBR Bonded To Steel
Engine Application:	ISUZU 4JJ1-T (3.0L Turbo Diesel)	Vehicle Applications:	ISUZU TFS85
Part No:	8-98043001-0, 8980430010	Vehicle Model Code:	NKNPVK
Engine Displacement:	3.0L (2999cc)	Bolt Torque:	40-60 Nm For Chassis Bolts, 50-70 Nm For Engine Bracket Bolts
High Light:	ISUZU 4JJ1-T engine mount rubber , truck engine mount with vibration damping , natural rubber SBR bonded engine mount

Product Description

Front Engine Mount Rubber 8-98043001-0 For Isuzu TFS85 4JJ1-T

Function: Front engine mount rubber absorbs engine vibrations and isolates the powertrain from the chassis frame. Reduces noise, vibration, and harshness (NVH) for Isuzu 4JJ1-T diesel engines.

The Front Engine Mount Rubber (OEM Numbers: 8-98043001-0 / 8980430010) is a premium-quality, direct replacement engine mounting component designed for Isuzu TFS85 4WD pickups equipped with the 4JJ1-T turbo diesel engine.

Part Number:	8-98043001-0, 8980430010
Product Name:	Front Engine Mount Rubber / Engine Foot / Engine Mount
Car Model:	ISUZU TFS85
Engine Model:	ISUZU 4JJ1-T (3.0L Turbo Diesel)
Condition:	100% Brand New
Warranty:	6 Months
Main Market:	Middle East, Asia, Africa, South America, North America & Europe

Front Engine Mount Rubber for Isuzu TFS85

Features & Advantages

OE Quality: Manufactured to Isuzu dimensional and material specifications for perfect fit and reliable vibration isolation
Premium Rubber Compound: Natural rubber/SBR blend resists oil, heat, and ozone
Steel Bonding: High-strength adhesive bonding prevents separation under load
Vibration Damping: Effectively absorbs engine vibrations, reducing cabin noise and driver fatigue
Corrosion Protected: Steel components are coated to resist rust
Restores Engine Alignment: Eliminates engine movement, clunking, and driveline vibration
Direct Replacement: Simple bolt-on installation using original hardware
Cost-Effective: Affordable alternative to genuine OEM mounts

Engine mount installation and application

Vehicle & Engine Compatibility

This front engine mount rubber is specifically designed for Isuzu TFS85 pickups with 4JJ1-T engine.

Isuzu Vehicle Models:

ISUZU TFS85 (4WD pickup, 4JJ1-T engine)
May also fit other Isuzu models with 4JJ1-T engine (e.g., D-MAX, MU-X) - verify compatibility

Engine Specification - ISUZU 4JJ1-T:

4-Cylinder, Inline Diesel, DOHC, Turbocharged, Common Rail
Displacement: 3.0L (2999cc)

Installation Notes

Typical installation steps for front engine mount:

Safely lift and support the vehicle. Use a jack to support the engine front (under oil pan with wooden block)
Remove the old mount bolts (usually 2-4 bolts)
Raise or lower the jack slightly to relieve pressure on the mount
Remove the old front engine mount rubber
Clean the mounting surfaces on the engine bracket and chassis frame
Compare new mount with old (bolt hole alignment and height)
Install the new mount, position the bracket, and hand-tighten bolts
Adjust the jack to align the mount, then torque bolts to manufacturer specification
Remove the jack and lower the vehicle
Test drive - listen for clunks or excessive vibration

Quality Control

Material Verification: Rubber compound tested for hardness, tensile strength, and elongation
Bond Strength Test: Pull test ensures rubber-to-metal bond exceeds specification
Dimensional Inspection: Overall shape, mounting hole spacing, and height verified
Compression Set Test: Sample compressed at elevated temperature to ensure permanent deformation within limits
Aging Test: Accelerated heat aging to confirm retained elasticity
Visual Inspection: 100% checked for voids, cracks, flash, or missing rubber
Packaged Safely: Mount wrapped in plastic, boxed to prevent deformation

Packaging and Delivery

Neutral export packing or customized packaging available
Carton or wooden case for safe transportation
Fast delivery for stock items
Shipping by Express Air or Sea

Inquiry

For pricing, availability, or bulk purchase of the Front Engine Mount Rubber 8-98043001-0 For Isuzu TFS85 4JJ1-T, please contact our sales team for a competitive quote and expert technical support.