OEM Standard Stabilizer Bar Bushing with Vibration Damping and Weather Resistant for Isuzu TFR54 4JA1

Premium-quality stabilizer bar rubber bushing designed as a direct replacement for Isuzu TFR54 light-duty pickups with 4JA1 diesel engine. This component reduces body roll and absorbs road vibrations for improved handling and ride comfort.

• OE Quality: Manufactured to Isuzu dimensional and material specifications for perfect fit and reliable performance
• Vibration Damping: Absorbs road shocks, reducing cabin noise and driver fatigue
• Noise Reduction: Eliminates metal-to-metal contact, preventing clunks and squeaks
• Weather Resistant: Rubber compound resists aging, ozone, and temperature extremes
• Restores Handling: Reduces body roll and improves cornering stability
• Direct Replacement: Simple clip-on or split design for easy installation
• Cost-Effective: Affordable alternative to genuine OEM bushings

This stabilizer bar rubber bushing is specifically designed for:

• ISUZU TFR54 (light-duty pickup, 2WD/4WD)
• May also fit other Isuzu TF series with similar front suspension - verification recommended

• 4-Cylinder, Inline Diesel
• Displacement: 2.5L (2499cc)

1. Safely lift and support the front of the vehicle
2. Remove the stabilizer bar bracket bolts (access from under the chassis)
3. Remove the old rubber bushing from the bracket or stabilizer bar
4. Clean the stabilizer bar and bracket mounting surfaces
5. Apply a small amount of soapy water or rubber lubricant to the new bushing
6. Position the new bushing onto the stabilizer bar (if split type, wrap around bar)
7. Reinstall the bracket and hand-tighten bolts
8. Torque bracket bolts to manufacturer specification (typically 30-50 Nm)
9. Repeat for the other side
10. Lower vehicle and test drive - check for clunking noises over bumps

• Material Verification: Rubber compound tested for hardness (Shore A), tensile strength, and elongation
• Dimensional Inspection: Inner diameter, outer diameter, width, and profile verified
• Compression Set Test: Sample compressed at elevated temperature to ensure permanent deformation within limits
• Aging Test: Accelerated heat aging (70°C for 70 hours) to confirm retained elasticity
• Visual Inspection: 100% checked for voids, cracks, flash, or missing rubber
• Packaged Safely: Bushing wrapped in plastic bag, boxed to prevent deformation

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Stabilizer Bar Rubber Bushing 8-94459459-2, please contact our sales team for a competitive quote and expert technical support.