Sub Spring Rubber Auxiliary Spring Bumper with Shore A 65-75 Hardness High-grade Natural Rubber for Isuzu NPR Direct OEM Replacement
Key Attributes
Product Summary
OE-quality sub spring rubber for Isuzu NPR trucks. Provides progressive overload protection, prevents metal-to-metal contact, and withstands heavy loads. Direct replacement with Shore A 65-75 hardness.
Product Details
Isuzu NPR rubber auxiliary spring
,Sub spring bumper OEM replacement
,High-grade natural rubber spring bumper
| Part Number | 8-97254387-0, 8972543870 |
|---|---|
| Product Name | Sub Spring Rubber / Auxiliary Spring Bumper / Overload Bumper |
| Car Model | ISUZU NPR |
| Engine Model | NKNPVH |
| Condition | 100% Brand New |
| Origin | China Mainland |
| Warranty | 6 Months |
- OE Quality: Manufactured to Isuzu dimensional and material specifiions for perfect fit and reliable overload protection
- Progressive Cushioning: Absorbs impact progressively as suspension compresses, preventing harsh bottoming out
- Heavy-Duty Rubber Compound: Resists permanent compression set, tearing, and aging under heavy loads
- Weather Resistant: Formulated to withstand UV, ozone, road salts, and temperature extremes
- Protects Suspension Components: Prevents metal-to-metal contact, reducing fatigue on main springs, frame, and axle
- Restores Ride Quality: Eliminates harsh clunks and improves comfort when carrying heavy loads
- Direct Replacement: Matches OE mounting hole pattern and height - simple bolt-on installation
- Cost-Effective: Affordable alternative to genuine OEM without compromising durability
- ISUZU NPR (NPR59, NPR66, NPR70, NPR71, NPR75, etc.)
- May also fit other Isuzu medium trucks with similar rear suspension - verify
- Safely lift and support the rear of the vehicle - raise the rear and support the frame on jack stands. The rear axle should hang freely
- Loe the sub spring rubber - usually mounted on the chassis frame above the rear axle or on the spring plate
- Remove the old rubber - if bolt-on, remove the mounting bolt/nut. If press-fit, pry out with a screwdriver
- Clean the mounting surface - remove rust and debris
- Inspect the mounting bracket - check for cracks or damage
- Install the new rubber - position onto mounting stud or bolt hole. If bolt-on, insert bolt and tighten to specifiion (typically 30-50 Nm). Do not overtighten (rubber may deform)
- Repeat for the other side - replace both left and right bumpers simultaneously for balanced performance
- Lower the vehicle - test drive over bumps to ensure no abnormal noise
- Material Verifiion: Rubber compound tested for hardness (Shore A), tensile strength, and elongation per ASTM D2000
- Dimensional Inspection: Overall height, outer diameter, mounting hole diameter/thread, and shape verified against OE blueprints
- Compression Set Test: Sample compressed to 50% of original height at 70°C for 22 hours; permanent deformation measured
- Tear Resistance Test: ASTM D624 die C tear strength verified
- Aging Test: Accelerated heat aging (70°C for 70 hours) to confirm retained properties
- Visual Inspection: 100% checked for voids, cracks, flash, or surface defects
- Packaged Safely: Rubber bumper wrapped in plastic, boxed individually or in pairs
Neutral export packing or customized packaging available
Carton or wooden case for safe transportation
Fast delivery for stock items
Shipping by Express Air or Sea