High-Strength Forged Steel Gear Shift Lever with Corrosion-Resistant Coating for Isuzu 100P 600P Truck - Direct OEM Replacement

The Gear Shift Lever (OEM Number: 8-94566457-0 / 8945664570) is a premium-quality, direct replacement transmission control component designed for Isuzu 100P and 600P series light/medium-duty trucks.

• OE Quality: Manufactured to Isuzu dimensional and material specifications for perfect fit and precise shifting
• High-Strength Steel: Forged construction resists bending and fatigue under normal use
• Precision Machined: Accurate pivot points and thread profiles for smooth operation
• Corrosion Resistant: Coated to withstand under-vehicle conditions
• Restores Shift Quality: Eliminates sloppy, vague, or difficult shifting
• Direct Replacement: Simple bolt-on installation - matches OE attachment points
• Cost-Effective: Affordable alternative to genuine Isuzu levers

This gear shift lever is specifically designed for Isuzu 100P and 600P trucks.

1. Remove the shift knob and upper boot (if needed)
2. Remove the interior trim to access the lower shift lever attachment
3. Disconnect the shift linkage (rods or cables) from the lower lever
4. Remove the retaining bolt or clip securing the lever to the pivot
5. Remove the old lower shift lever
6. Compare new lever with old - ensure length and pivot dimensions match
7. Apply grease to the pivot ball and bushings
8. Install the new lever, secure with bolt/clip, torque to specification
9. Reconnect the shift linkage and adjust as needed (cable tension or rod length)
10. Reinstall trim, boot, and shift knob
11. Test all gears for smooth engagement and proper shift pattern

• Material Verification: Steel composition and hardness tested
• Dimensional Inspection: Overall length, thread pitch, and ball diameter verified
• Hardness Testing: Surface hardness within specified range
• Visual Inspection: 100% checked for forging defects, burrs, or coating flaws
• Packaged Safely: Wrapped in anti-rust plastic, boxed with foam